Foshan Gaoming Casile NFJ

Product Introduction: It is a factory ready-mixed powder that has undergone strict quality control to facilitate on-site construction. It contains metallic mineral aggregate materials and Portland cement with additives that promote construction properties. Ensuring that the material is graded and free of impurities, the aggregate displays good electrical conductivity and wear resistance.
Product usage:
Suitable for concrete surface layers that need to improve wear resistance, especially in anti-spark and anti-static areas. For example: flammable warehouses, chemical plants, petrochemical plants, hazardous chemical product workshops, gas stations, liquefied gas stations, arms and ammunition depots, aircraft hangars, textiles, electronics, paper, printing plants, etc., areas where static electricity is generated for a long time.
Product advantages:
. Make the ground extremely hard, resistant to wear and impact
. Form an integral bond with the concrete base surface
. Prevent sparks and conduct static electricity
. Resistant to corrosion by various oils and greases
. Easy to construct
Material characteristics:
Wear resistance
The wear resistance of treated concrete floors is at least higher than that of untreated concrete floors. More than three times.
Electrical properties
Shows good electrical conductivity to dissipate static electricity. It can be grounded by traditional methods according to specific requirements. Due to the concentration of ductile metal materials on the ground, they are highly resistant to sparks from metal impacts.
Surface resistance value.&; ~.&;&;
Compressive strength
The standard compressive strength is achieved by using the same water consumption test block as in actual construction.
Storage:
Store the original packaging and curing agent in a normal temperature and dry environment. The storage period is one month.
Health and safety:
The cement powder contained in it will cause adverse effects on the skin during normal use. The alkali released when the product is mixed and becomes damp will damage the skin and irritate the eyes and respiratory system. Avoid inhaling the powder. Avoid skin and eye contact. Wear suitable gloves and eye protection.
In case of contact with skin, wash with clean water.
In case of contact with eyes, wash immediately with plenty of water and seek medical treatment.