3mm tag punching machine drill bit super discount

重量：

1kg

Fill a car with happiness, let peace clear the way, abandon all worries, let happiness surround you, store all the warmth, drive away the cold, release the true love of a lifetime, let happiness and health smile at you forever!
Tag punching machine drill bits Tag punching machine drill bit manufacturer Tag drilling machine drill bit price<>
Model-type<>
Maximum drilling depth<>
Cutting angle speed/<>
Voltage/power/.<>
Net weight of the whole machine<>
External dimensions&#;<>
Drilling diameter.../<>
.<>
-type electric drilling machine is for printing It is a special equipment for paper drilling in the industry. It has the advantages of beautiful appearance, simple adjustment, easy use, convenience and efficiency. It is widely used in various printing departments such as individual institutions, various small and medium-sized printing plants and express printing services. It is an indispensable equipment for drilling paper products such as clothing tags and book binding. <>
Main parameters:<>
Maximum drilling diameter&;<>
Minimum drilling diameter&;.<>
Maximum drill tip to edge distance<>
Number of consecutive drilling holes (fixed rules)<>
Drilling method hollow core drilling<>
Drill needle shank optional (taper) type<>
Instructions for using the drill needle:
<>
When using the drill, the paper should be placed neatly and flat without being bent or uneven. When the machine is in operation, pay attention to the coordination and lubrication of other parts in the machine. If the paper placement is not up to standard or the coordination and lubrication between other parts of the machine is not good, it is easy for the needle to become clogged, broken or the product to be unqualified. In addition, holes that have been drilled during drilling must not be drilled again, otherwise the hole will not form a circular pinhole, and the paper scraps will be skewed and the needle will be blocked.
<>
Usage speed:
①Depends on the size of the pinhole. The smaller the pinhole, the slower the progress of the pressing rod should be.
② The pressing speed of the pressing rod should be kept constant and should not be too fast or too slow. If it is too fast, the drill needle may break if it is used too hard; if it is too slow, it may cause the paper to become scorched.
③The smaller the distance between the two holes to be drilled, the slower the speed.
④ The drilling needle must not be stopped midway during operation to completely discharge the drilling waste. In addition, attention should be paid to promptly replacing the drill bit after several hours of continuous use to prevent the drill bit from continuing to work under fatigue.
<>
If the drilling material is peritoneal or glazed paper, the time difference between changing the paper to be drilled cannot be too long, and you cannot wait for the drill needle to cool before drilling: because the drill needle Film or oil will condense in the pinhole after work, causing discharge difficulties. In order to prevent needle clogging, offset paper must be used as drilling material to drain away the waste material remaining in the hole. It is especially important to complete this work before the drill needle rests.
<>
The total thickness of the paper to be drilled: depends on the length of the drill needle and the material of the drilled paper. They are: the total thickness of the offset paper stack should be % of the needle length, coated paper or base paper, %, peritoneal or glazed paper, %, the following: hole spacing, length of drill needle to be drilled, the total thickness of the offset paper to be drilled should be % of coated paper or base paper, Peritoneal or varnishing paper for the following.
<>
No lubricant should be used on the drill needle to avoid hindering the discharge of drilling waste (only candles can be used as lubricants). If the drill needle makes noise and becomes clogged again during use, you can use a candle wipe to place it on the needle mouth. Because the drill bit will generate heat when working, the candle will melt and flow upward along the needle tube. At the same time, the drilling waste will also be discharged with the upward flow of the candle oil (note: This method is only used when the drill needle is hot or hot) or use Diaopai soap. <>
Jining Shunyuan Industrial and Mining Equipment Co., Ltd. was established in 2001 and specializes in the production of mine car derailers with first-class quality and low price. Welcome to call us for consultation and purchase! <>
Contact: Gao Jing<>
Telephone: -<>
Mobile:<>
:<>
Ali Wangwang: