Tai'an Hongcheng丨Customized cold press, woodworking cold press

Woodworking cold press series models are used to press furniture panels, wooden doors, various boards and flatten and shape furniture. It can make the bonding between boards stronger and the pressure is strong and there is no force back. The working mode of Hongcheng brand woodworking cold press is hydraulic type. This hydraulic cold press has low working noise, fast lifting speed, stable pressure, strong strength and low maintenance rate. Ordinary home furnishing factories are generally equipped with multiple woodworking cold presses, which have high recycling efficiency, high quality and stable use. They are mostly used for laminating plywood, multi-layer boards, solid wood doors, steel wood doors, exterior wall insulation boards, etc. This machine tool mainly consists of: hydraulic system, electrical control system, pressure plate balancing mechanism, pressure plate and fuselage.
Introduction to system equipment
Hydraulic system: consists of oil cylinder, oil tank, oil pump, oil pump motor, control valve block and pressure gauge. There is oil in the oil tank, and the oil pump motor drives the oil pump to realize the pumping of oil and sends the oil to the oil cylinder through the connecting oil pipe to make the oil cylinder work. Among them, the relief valve controls the maximum pressure of the hydraulic system and acts as a safety valve to prevent system overload; the one-way throttle valve can stabilize the back pressure generated by the pressure piece during the extrusion process. The solenoid ball valve is used to maintain the system settings. The pressure gauge is used to display the pressure;
Electrical control system: It is mainly composed of a main circuit and a control circuit. Automatic circuit breakers, fuses, and AC contactors are used in the circuit to overload and short-circuit machine tool motors, solenoid valves, etc. , Loss of pressure and under-voltage protection;
, Pressure plate balancing mechanism: mainly composed of a balancing lifting rack, lifting gear, rotating shaft, and fixed rotating bearing. The two balance racks on the left and right are mounted on the fuselage. Lifting gears are fixed at both ends of the rotating shaft. Bearings are installed at both ends of the rotating shaft so that the rotating shaft can rotate flexibly. When the pressure plate is raised and lowered, the lifting gear is not balanced and the rack meshes and rotates so that the pressure plate always maintains balance during the lifting process;
. Pressure plate: consists of an upper pressure plate and a lower pressure plate. The upper and lower pressing plates are made of profiles and steel plates welded together. The working plane is finely machined by a large gantry milling machine to ensure that the working plane is flat and smooth. The upper pressure plate is connected to the cylinder rod of the oil cylinder to realize the lifting and lowering of the pressure plate by the lifting of the oil cylinder. The lower pressure plate is welded directly to the fuselage base. The entire machine structure is tightened. Body: It is welded by profiles and plate steel, with compact structure and good strength.
Ton hydraulic cold press:<>
Plate size:&;
Maximum pressure:
Large quantity platen thickness:
Installed power:<>
Plate height:<>
Specifications:&;&;
Technical parameters of woodworking cold press:
Pressing plate size:&;
Maximum pressure:
Large quantity pressing plate Thickness
Pressure plate height:
Specifications:&;&;