Year1
- 产地：
- 重庆
- 厂家：
- 西南
- 型号：
- 6063
- Standard: B/
Product name: Aluminum rod, aluminum alloy rod
- Characteristics of aluminum: Aluminum rod is a low-alloyed, high-plasticity alloy. It has many valuable characteristics. :. Heat treatment strengthens the impact toughness and is insensitive to defects. .It has excellent thermoplasticity and can be extruded at high speed into various profiles with complex structures, thin walls, and hollows or forged into forgings with complex structures. The quenching temperature range is wide and the quenching sensitivity is low. After extrusion and forging, as long as the temperature is higher than the quenching temperature . It can be quenched by spraying water or water penetration. Thin-walled parts (&;) can also be air-quenched. .Excellent welding performance and corrosion resistance, no tendency to stress corrosion cracking. Among the heat treatment-strengthenable aluminum alloys, this alloy is the only alloy in which no stress corrosion cracking phenomenon has been found. .The surface after processing is very smooth and easy to anodize and color. The disadvantage is that if it is parked at room temperature for a period of time after quenching, the strength will be adversely affected (parking effect).
-
- The influence of aluminum rod alloy elements on performance:
Aluminum alloy is a heat-treatable strengthened alloy with medium strength in the system and is the main alloying element. The main work is to determine the preferred chemical composition and The percentage content (the same below for mass fraction).
The role and influence and composition of the strengthening phase. The higher the content, the greater the heat treatment strengthening effect, the higher the tensile strength of the large material, but the deformation resistance also increases. The plasticity of the alloy decreases and the processing performance changes. Bad corrosion resistance deteriorates.
The number of effects and influences should be such that all elements in the alloy can exist in the form of phases to ensure that the effects of the elements are fully exerted. As the content increases, the alloy grains become finer, the metal fluidity increases, and the casting performance becomes better. The heat treatment strengthening effect increases the tensile strength of the profile, while the plasticity decreases and the corrosion resistance deteriorates.
-
- Chemical composition of aluminum rod:
Aluminum: balance
Silicon: .～.
Copper: .
Magnesium: .～.
Zinc:.
Manganese:.
Titanium:.
Chromium:.
Iron.
Individual:. Total:.
-
- Mechanical properties of aluminum rods:
Tensile strength b (): ~ The ultimate tensile strength of
is
Tensile yield strength.
Elongation. %
Elastic coefficient.
Bending ultimate strength
Poisson’s ratio.
Fatigue strength.
Solid solution temperature is: ℃
Annealing temperature is: ℃&;(-) Cool from ℃ to ℃ at ℃/cooling rate.
Melting temperature: ~℃.
Specific heat capacity:
Aluminum plates are used for construction profile irrigation pipes, extruded materials for vehicles, benches, furniture, elevators, fences, etc., as well as different colors for aircraft, ships, light industry sectors, buildings, etc. Decorative components.
-
- Product Notes:
Specification range: aluminum plate thickness-, width-length-single weight up to tons.
Delivery status: According to the user's requirements, it can be delivered in different conditions such as hot rolling and cold rolling.
Execution standards: According to user requirements, the products can be delivered according to the following standards: national standards, metallurgical industry standards, United States standards, standards Japan, Germany, Britain, B, European international standards, and standards related to special plates, etc.
Flaw detection standards: Production and inspection can be carried out in accordance with domestic and foreign flaw detection standards such as China (BB/), the United States (,,), Japan (,), Germany (), the United Kingdom (B), France (-), etc.
-
WhatsApp
