Best-selling 2A12 aluminum rod in stock

产地：

重庆

厂家：

西南

型号：

5A05

Introduction to aluminum: (&;Professional aluminum alloy manufacturer and distributor)
The aluminum plate is an aluminum alloy with considerable strength and cannot be strengthened by heat treatment; the plasticity is high in the annealed state and the plasticity is medium in semi-cold work hardening; The welding performance is good when using hydrogen atomic welding,
spot welding, gas welding, and argon arc welding for aluminum plates. The corrosion resistance is high and the machinability is good. The annealing state is poor and the machinability is good when semi-cold work hardening is used. Anodization is required when manufacturing rivets< br/> Processing.
Characteristics:
- series alloy is the most widely used aluminum alloy. This alloy has high strength, especially fatigue resistance: high plasticity and corrosion resistance. It cannot be heat treated and strengthened in semi-cooling
When work hardening, the plasticity is good; when cold work hardening, the plasticity is low; corrosion resistance is good; weldability is good; machinability is poor; polishing is possible. Mainly used for low-load parts that require high plasticity and good weldability
Working in liquid or gas media, such as fuel tanks, gasoline or lubricating oil conduits, various liquid containers and other small-load parts made by deep drawing: Wire is used to make rivets.
Chemical composition:
Aluminum: balance
Silicon: &;.
Copper: &;.
Magnesium: .~.
Zinc: &; .
Manganese: .~.
Iron .~ .
Note: Individual:&;.;Total:&;.
Mechanical properties:
Tensile strengthb ():
Conditional yield strength. ():
Elongation (%):
Linghong Note: Longitudinal mechanical properties of pipes at room temperature
Specimen size: all wall thicknesses< br/> Heat treatment specifications:
() Homogenization annealing: heating ~ ℃; insulation ~; air cooling.
() Rapid annealing: heating ~ ℃; holding time ~; air or water cooling.
() High-temperature annealing: heating to ~℃; the thickness of the finished product is ~ or ~; the holding time is ~ or ~; air cooling.
() Low temperature annealing: heating ~ ℃ or ~ ℃; holding time is ~ or ~ air cooling
Status:
Aluminum and aluminum alloy hot extruded seamless round tube (state) aluminum plate aluminum alloy Aluminum rod composition
Actual display of product pictures: (&;Professional aluminum alloy manufacturer and distributor)
_.
.
Aluminum plate warehouse.