Gabion mesh

, Microsoft Yahei, ) will be the grid
gabion r , Microsoft Yahei, ) will be staggered in place to avoid vertical cracks
: r , Microsoft Yahei, ,> will be the grid The four sides of the gabion cage net are erected, and the adjacent edges are locked with binding wires. When binding, the binding wires should be wrapped around two overlapping frame lines (when sewing the edges) or the double-knotted edges of the frame lines and the cage (when sewing the edges). When installing the gabion net on top of the completed bottom net, tighten it in a spiral to avoid damage due to heavy galvanizing. When installing the gabion net on the completed bottom net, use binding wires to secure it along the lower frame of the newly installed gabion net. On the bottom gabion net, adjacent gabion nets on the same layer should also be fastened to each other with binding wires to connect the grid gabion nets together
When constructing the same horizontal layer of a unit project, the grids should be After all the gabion nets are in place, start filling the pebbles. In order to prevent the gabion nets from deforming, the stone filling height difference between two adjacent gabion nets (including adjacent cells of the same gabion net) should not be greater than
Before installing the gabion grid, the bank slope and ground should be properly trimmed, and the original shape of the bank should be maintained as much as possible, but there should be no obvious ridges and depressions
The added pebbles are selected from the floodplain, and the The compressive strength should meet the design requirements, and the pebble particle size should be between When pebbles are placed on the exposed surface, pebbles with a particle size of no less than 100 mm should be used and smoothed manually to obtain a beautiful surface and prevent water flow from washing the pebbles away from the mesh. The height of the overfilled stone material should be ensured to leave room for subsidence
After filling the stone cage grid with stone material, the top cover will be put down, and then the two overlapping frame lines will be spirally tightened with binding wires. The pitch should not be greater than 1. The key to tying the lock is as follows:
Spread humus soil on the masonry grid gabion net to facilitate the growth of vegetation. You can rest after the placement is complete
> r , Microsoft Yahei, , )< r/ br />