500kg vertical self-priming feed mixer and grinder pig feed screw mixer and grinder

Our machines are all for large items and do not support express delivery. They are all delivered through logistics. When they are delivered to your city or county, you need to bring your ID card to pick up the goods
If you don’t understand, you can go online Chat:
Consultation phone number:
Company Taobao website: :b
Vertical feed crushing and mixing machine is an all-in-one mixing machine that can both crush and stir,
kg The mixer's motor is equipped with a kilowatt motor, the pulverizing motor is equipped with a kilowatt motor
The kilogram mixer is equipped with a kilowatt motor, and the pulverizer is equipped with a kilowatt motor
Output: kilograms per time, tons per time
Voltage:
This It is a small compound feed processing equipment specially designed for small and medium-sized compound feed factories in small farms of rural farmers. It integrates vertical lifting of the mixing bin and horizontal feeding of materials. It has a simple and compact structure. It is disposable, has a small investment, is economical, practical and convenient to maintain, and does not require a special production site. etc. Advantages such as uniform mixing
The structure and working principle of the feed machine:
The pulverizer casing + material are welded, and the feed port is at the top of the pulverizer. It can be matched with various forms of feeding structures. The pieces are arranged symmetrically. When the pulverizer is working, the material enters the crushing chamber and is gradually crushed under the action of the high-speed rotating hammer and the friction of the sieve plate, and under the action of centrifugal force and air flow. Discharge through the bottom outlet.

Precautions for use and safety of feed machine equipment:
In order to avoid accidents during transportation, loading and unloading of the machine, it is necessary to check whether the bolts and nuts of each part are loose, flat teeth, and round teeth before use. , whether the spindle nut is loose. Turn the pulley by hand to check whether there is any collision on the machine.
The operation can only start after the machine rotates flexibly, whether there are any debris inside the machine, and it has been idling for a few minutes after turning on the machine. There are no abnormal phenomena.
Be sure to remove debris from the materials when working. Iron, stones and other objects are strictly prohibited from entering the machine to avoid damage to the machine and injury to people.
The material receiving cloth bag should have a length and diameter of more than one meter. meters, the fabric should not be too dense, and the material should be discharged in time during use to ensure that the bag has sufficient breathability.
Feeding should be even and pay attention to the power load to avoid choking. When crushing particulate matter, the pumping plate regulator can be used to adjust the feeding amount.
Hammer type: When the wear of one corner affects the work efficiency, the hammer blades can be turned around from the opposite side (when turning around, the group is adjusted together to avoid causing unbalance of the rotor). All hammer blades should be replaced.
Butter should be added before starting the machine every day, and the bearing condition should be checked after hours of use. When installing the sieve, the burr side should be installed on it. According to the fineness of the crushed materials, select sieves with different diameters.

Remarks:
The barrel wall thickness of the feed machine equipment is
The motor of the feed machine equipment is a national standard copper core motor and the crushing motor is, mixing motor
Mechanical dimensions: * *
The quality guarantee period of feed machine equipment is years

< < <