Animal visual insemination system, visual insemination gun, dog visual insemination gun

Animal Visual Insemination System (Price: ~Yuan Zhangyun Tel: WeChat synchronization)
Introduction:
Integrate the world's leading microelectronics, micromachines, optics, software technology and patented design to fill the gap in the industry;< br/> The front camera module, combined with a professional image processing system and cold light source, has clear images and stable performance;
The front end is slender, and in addition to the light source and camera module, there are three channels, namely the working channel, water channel and air channel. , with a wide range of uses;
The probe has a direction, which facilitates adjustment of the insertion direction, making it easier to find the target position and improve the efficiency of insemination;
The professionally designed arc-shaped working channel facilitates animal surgery and reduces the risk of injury. At least;
Gradual brightness adjustment, suitable for use in different environments;
The handle designed in line with ergonomic mechanics is simple, lightweight, and easy for doctors to operate;

The basic configuration is as follows:< br/> Contains endoscope probe, endoscope host, display screen, B data cable, connecting cable, endoscope data (signal) connecting cable, power cord, manual, packaging box;
Includes foot switch , gas cylinder, water, gas hose;

Notes:
. When using the inner tube, please insert it slowly. If you encounter difficulty in inserting, you should stop inserting to avoid damaging the front end of the probe. lens.
. If there is an abnormality in the machine, please cut off the power supply immediately to prevent accidents.
. Please handle the probe with care to prevent damage to the precision optical electromechanical module. Do not use brute force to operate.
. When the machine has been working for a long time, the optical electromechanical module at the front of the probe may become hot. This is a normal phenomenon. At this time, the front of the probe should be avoided from touching the skin.
. Please do not use strong light to avoid damaging the photosensitive chip.
. The working environment temperature should not be higher than ℃.


How to use the instrument:
Check the tube: Before use, check whether the tube is abnormally deformed or broken.
Check the lens: Check the lens glass. If there is any foreign matter or the surface is not clean, please wipe it with cotton or lens cleaning paper.
After the preparations are done and everything is normal, start using the endoscope!
Turn on the power, the system works, and use the light source brightness adjustment () to adjust the image brightness.
After the inspection, it is best to clean the endoscope according to the following methods.
The disinfection method is to rinse the hard pipe part with water and wipe it with alcohol for disinfection.