Henan Zhumadian polyethylene closed-cell foam board 2cm thick is available from stock to Guangfeng

规格：

1*2

密度：

90kg

硬度：

35

&Product name: Polyethylene closed-cell foam board& Specifications: *
Thickness:
Density:
&Polyethylene closed-cell foam board is made of polyethylene as the main raw material. Elastic lightweight waterproof sheet with low density and good resilience.
Characteristics of low-foaming closed-cell foam board
&Polyethylene closed-cell foam board has low density and high rebound. The surface water absorption rate of the board is very low, so it has good anti-seepage properties and is suitable for a wide temperature range. Resistant to acid and alkali corrosion and organic solvents.
Commonly used specifications and models of polyethylene closed-cell foam boards
General sizes include *, and *thicknesses include c, .c, c, .c, etc. Applicable projects for polyethylene closed-cell foam boards
The series of polyethylene closed-cell foam boards produced by our company have good quality and beautiful appearance. They are suitable for reservoirs and dams, concrete highway expansion joints, subway passages, culverts, waterways, and airport runways. Seam filling and more. Polyethylene foam board filled foam board low foaming closed cell waterproof foam board factory price direct sales
Polyethylene foam board is a common concrete highway expansion joint joint board. The polyethylene foam board produced by our factory has low density, light bulk density, high recovery rate and high stretch strength. It has a honeycomb-like appearance with evenly distributed holes and independent bubble structure. When using polyethylene foam board, the surface water absorption rate is low and the anti-penetration performance is good. Replace traditional three-oil-four-felt, asphalt wood, fir board and other materials.
The polyethylene foam board produced by Hengshui Guangfeng Engineering Rubber Co., Ltd. is resistant to corrosion by organic solvents such as acids, alkalis, salts, and oils, and has excellent aging resistance. It does not flow at high temperatures and does not crack at low temperatures. Resistant to high and low temperatures +℃~℃, does not flow, deform, or crack, and has a long service life.
Polyethylene foam board is a new type of joint water-stopping material in China. It has been repeatedly tested by the Chinese Academy of Transportation Sciences and other units, proving that its performance is lower in density and higher in recovery rate than wood, cork, rubber, and asphalt. specialty. This product has been widely used in foreign markets, and can be used in highways, road bridge expansion joints, overpasses, highways, airport runways, tunnel bridges, underground passages, subways, bridge head retaining wall joints, slope protection on both sides of the highway, Joints and water-stopping materials in concrete projects such as roadbed slope protection, concrete joints, expansion joints and water-stopping materials in power plant moisture-proof gates, cooling towers, construction and other projects Concrete highways, viaducts, culvert tunnels, airport roads, and dam slope protection In water conservancy and electric power concrete projects.
Polyethylene foam board product features: light bulk density, high telescopic strength, non-water absorption (replacing traditional three-oil-four-felt, asphalt wood, fir board and other materials). The product is environmentally friendly, easy to construct, and has good anti-seepage, anti-leakage and water-stopping effects. , Corrosion resistance, aging resistance, high and low temperature resistance + ℃ ~ ℃, no flowing, no deformation, no brittleness, long service life. , has an independent closed-cell bubble structure, and the honeycomb-shaped holes are evenly distributed. Integrates firmly and tightly with the cement binder. Naturally adapts to changes in expansion and contraction, enhancing the expansion and water-stopping effect.