Taizhou industrial factory sliding door

颜色：

多色可选

尺寸：

根据实际门洞尺寸

透视：

可带小窗和小门

&Contact: Manager Wang:
Taizhou sliding door manufacturer, Taizhou factory sliding door, Taizhou industrial sliding door
1. Taizhou industrial sliding door manufacturer installation steps:
. Install steel structure :
& According to the size of the door opening, stand the steel structure on both sides of the door opening. When erecting the steel columns, you need to pay attention to the verticality and horizontality of the steel structure, and you need to ensure that the steel structure can withstand a certain door's strength and weight.
.Installation track:
According to the width and height of the lifting door, first test the horizontal position, then fix the position with screws, and then fix and install all points.
&&. Install torsion spring:
Torsion spring center bracket, nylon rubber ring, fixed flange, torsion spring matching the weight of the door body, locking flange, winding wheel, bearing bracket in order (Distinguish the left and right sides) Put it on the galvanized steel pipe, and pay attention to whether all parts are installed correctly.
&&.Install the door panel:
Place the bottom sealing strip at the bottom of the bottom door panel and fix it to the door panel with self-tapping nails. Place each door panel in order on the erected track, and use tapping nails to connect each fold and each door panel so that each door panel is combined into one.
.Overall
Adjustment:
Manually slide and lift the door, observe whether the door body is running smoothly, whether the strength of the torsion spring is appropriate, and make adjustments if it is not appropriate.
.Install the motor
:
Connect and fix the chain box to the motor, connect the power supply, observe the operation of the motor, and adjust the up and down strokes.
. Door body wiring:
Take it out from the electric switch terminal at the end of the motor, follow the motor hanger to the left side of the hole, and then connect the manual switch. The wiring should be horizontal and vertical, which is both beautiful and beautiful. Reasonable.
To summarize:
The installation of Taizhou industrial sliding doors is relatively complicated, and professional training and guidance is required before execution, whether it is splicing or wiring. The lifting methods of Xilang sliding doors are different, and the aspects that need to be paid attention to during installation will also be different, which requires great attention.
2. Advantages of Taizhou factory sliding door:
&&. High safety guarantee:
The sliding door has safety treatments on the steel wire rope, torsion spring, bottom safety and door panel track, and can be easily Good protection of door safety and personnel safety.
.Strong service life:
The sliding door panel has high strength, and the torsion spring has been specially treated to ensure that it can be used for thousands of cycles, and the door can be used for up to years.
. Manual automatic conversion:
The sliding door motor side is equipped with a chain, which can be used as an emergency opening device in the event of a power outage, which is more convenient.