- 型号:
- 150*18
- 作用:
- 防溢
- 品牌:
- 世邦
Anti-spill skirt: Commonly known as coal retaining skin, it is made of rubber and polyurethane composite, which can better improve sealing and wear resistance, effectively prevent fly dust spillage, and is installed in the guide groove at the rear of the belt conveyor. The lower parts of the side plates on both sides are used to seal the dust caused by blanking and prevent material from spreading.
Product installation
Quickly fix the skirt panel through angle aluminum, clamps, etc.:
Angle aluminum (&) is pressed and formed at one time, material: all aluminum, beautiful appearance, no rust, The top is a round column, which is locked in the holder and will not fall off.
The base of the clamper is welded to the outside of the side of the guide trough, and the slideway goes deep into the base, allowing the clamper to move left and right appropriately along the base.
Manually rotate the compression handle and push it upward (downward) to the end when appropriate. This can apply sufficient pressure to the diagonal aluminum to maintain the position of the skirt board, and the compression handle will not loosen and fall off.
The holder is made of hot-dip galvanizing, which is light in weight, has good anti-corrosion performance and does not rust.
The fastening bolts are made of stainless steel and will never rust. They are suitable for use in dark, humid and even short-term water flushing environments.
Except for the first installation, the holder base needs to be welded, the rest of the process and subsequent replacement of the skirt board do not require the use of any tools, and installation and disassembly are extremely convenient and fast.
After unpacking, check whether the product is missing according to the packing list, just make sure it is not lost.
Technical features
The overall anti-overflow skirt uses a double sealing structure of straight plate + skirt, with excellent sealing effect.
Straight plate: Its function is to prevent the spillage of large particles. The bottom of the straight plate (the part in contact with the belt) is & =:/\C~\~\C~\\\&r-shaped imported tire wear-resistant rubber. The bottom is large and wears for a longer time.
. Skirt head: Its function is to prevent dust from overflowing, and it is the most severely worn part. Imported tire wear-resistant rubber is used, and modified wear-resistant rubber with special formula and high-pressure casting is added. The wear-resistant performance is several times higher than that of polyurethane, which greatly extends the service life of the anti-overflow skirt. After actual use on site, the anti-overflow skirt has a service life of &. years at a belt speed of &/.
The skirt ear section is made of natural rubber and has good elasticity. Relying on the elastic force, the head of the skirt plate exerts appropriate pressure on the belt, so that the head of the skirt plate always remains close to the belt, ensuring that dust does not escape.
The inner side of the skirt head adopts single-sided arc transition. When the belt goes astray, the belt and skirt head will not be damaged. When the belt returns to normal, the skirt head will automatically return to its original shape.
The overall material has good elasticity, low temperature resistance and no cracking.
It has flame retardant and antistatic properties, making it safer to use.
The skirt panels on each side of the guide trough are made into a whole as required, and are the same length as the guide trough to prevent air leakage at the joints.
Contact person: Manager Tong Tel:
:& Fax:
Email:
@
Address: Industrial Park, Yandian Town, Yanzhou City, Shandong Province
& _