Sichuan Chengdu high-density polyethylene closed-cell foam board L-600 type 2cm thick in stock

规格：

1.3*2.8

密度：

120公斤

硬度：

55

& Common names of polyethylene closed-cell foam boards: polyethylene closed-cell foam plastic boards, foam caulking boards, polyethylene expansion joint boards, seam boards, B-type caulking boards
Size: *
Density :
Foam board classification: According to the foaming ratio, polyethylene closed-cell foam boards are divided into two varieties: type (also called type) and type. According to the pressure-bearing size, they can be divided into medium-pressure polyethylene closed-cell foam boards (type) and type. High-pressure polyethylene foam plastic board () whose medium size (also called type) is suitable for cement joint caulking boards for ordinary ditches and pools. Because it is harder, it is suitable for cement joint caulking boards for reservoir dams
& Polyethylene closed-cell foam board: low density, high recovery rate, and independent bubble structure.
.
&Polyethylene closed-cell foam board: high density, high recovery rate, and independent bubble structure.
Features of polyethylene closed-cell foam board: low surface water absorption and good anti-penetration performance. Resistant to acid, alkali, salt, oil and other organic solvents, and has excellent aging resistance. It will not flow at high temperatures and will not be brittle at low temperatures.
The high-pressure type polyethylene closed-cell foam board is a foaming rate board. The appearance is pure black. The rough surface shows obvious pores. The diameter of the pores is about . The texture is very hard, like a wooden board, but its toughness is not as good. Medium pressure closed cell plate with very high compressive strength and tensile strength. The specific gravity is relatively large, weighing about kilograms per square meter. Due to its performance and cost, high-pressure polyethylene closed-cell panels are mainly used in large-scale hydropower transportation projects such as high-speed railways, airports, and panel dams.
Polyethylene closed-cell foam boards have the following application ranges, and the results are quite good.
&Seam plate for earth highway expansion joints
&Waterstop for road and bridge joints
&Expansion joints for water conservancy engineering dams, dam protections, stilling sills, slope protections and blocking walls Board
&Waterstop joint board for hydropower, thermal power, engineering, and water tower bottoms
&Setting joints for construction and caulking boards for frame structures
&Waterstop for pools in domestic water plants and sewage treatment plants Caulking panels
&Jointing panels for airport runways
&Jointing panels for ports, docks, and concrete
&Water-passing jointing panels for concrete in water tunnels and tunnels
&Subway , Underground passage concrete water-stop joint plate.
&Nowadays, with the advancement of science and technology, the specifications and thickness of polyethylene foam boards can be customized and can be cut into boards and strips of different thickness specifications.
& Hengshui Guangfeng Engineering Rubber & Plastic Co., Ltd. was established in 2008. It is a modern enterprise integrating engineering rubber R&D and production. The polyethylene closed-cell foam board manufacturer is very advanced and the polyethylene closed-cell foam board manufacturer is not easy. Absorb water. If the humidity of the polyethylene closed-cell foam board manufacturer is too high, it will affect the thermal and mechanical properties of the material. The low water absorption of the polyethylene closed-cell foam board manufacturer will help maintain these properties. Polyethylene closed-cell foam board manufacturers are not only environmentally friendly but also recyclable. Polyethylene closed-cell foam board manufacturers are recognized by many manufacturers and users in the industry. I believe that we will rely on our company's profound skills and honest business methods to bring high-quality polyethylene closed-cell foam board manufacturers to our users.
[Other products]: Polyethylene closed-cell foam board, rubber waterstop, swells when exposed to water, waterstop strip, two-component polysulfide sealant, rubber bearing, one-component polyurethane sealant, two-component polyurethane sealant, swells when exposed to water Waterstop glue bridge expansion joint geotextile