Design and build a glass electric melting furnace with a daily output of 3 tons

r> >< =>Our company specializes in designing and manufacturing various large and medium-sized glass electric furnaces. The cooperation method is flexible (it can be packaged in large quantities, or the manufacturer can purchase materials by itself, and we will be responsible for technical guidance on installation and debugging). The after-sales service is considerate and has a high reputation, which is well received by people in the industry. The following is a detailed introduction to large glass electric melting furnaces.
brr> >< =>One melting amount
brr>< => >
c)> Ton of melted glass liquid with guaranteed quality and quantity within one hour.
brr> >< =>Two melting types
brr>< =>& >It can not only melt soda-lime glass, glass, opal, etc., but also can melt high borosilicate, lead glass, etc. Material quality.
brr> >< =>Three-melting system
brr>< =>Can be designed to melt materials every day and produce >
>hours
. brr>< =>It can also be designed to mix materials every hour and >produce in shifts every day
. This type of electric furnace can also be used for hourly production. brr>< =>It can also be designed to mix materials every hour> and produce in shifts every day
. This type of electric furnace can also be used for hourly production. >
>< =>Four power consumption
>
< => >The melting pool is a central area dedicated to melting molten glass.
c)> Its power consumption is. .degree/kg glass liquid.
>
< =>& >The working pool is a material pool specially used for production. Its power consumption is small, which is directly related to the number and size of the material intake and production management.
r> >< =>Five feeding methods
>
< => >
>Feeding can be done manually or mechanically and automatically. Manual feeding is easy to control, the feeding is uniform, and the cost is low, so it is widely promoted and used.
r> >< =>Six discharging methods
>
< => >
>Materials can be picked manually or dropped.
r> >< =>Seven heating methods
>
>< => Use molybdenum electrodes or tin oxide electrodes to conduct heat from the center of the electric furnace to the surroundings. This heating method heats evenly and can easily The quality of the materials is guaranteed, and about % of the materials can be used.
r> >< =>Eight cooling methods
>
>< =>The electrode must be cooled during the working process, either water cooling or air cooling. Water cooling is better.