Year1
<: cbrr=>
>.Tons of intermittent type
>.Tons
>.Tons
>kWh/kg
>.kWh/kg
>KW< br/> >KW
>. About a year
>. About a year
> Italic_B> One working method:
> Kaiti_B> Intermittent &&Heitian chemical material, produced during the day. It can produce materials in hours and produce in hours. It can also produce materials in hours and produce in hours. It depends on how easy the material is to melt.
> KaiTi_B> Continuous && hourly chemical processing, production during the day.
> KaiTi_B> 2& Discharge method: artificial seasoning, dripping. Designed according to user requirements.
> KaiTi_B>三& c)>Can melt materials of various colors
, c)>such as amber, copper green, cobalt blue, sky blue, grass green, yellow green, black, purple, red, etc. .
Can be replaced with different colors of the same tone. Especially the molten red material not only has a correct color, but also has a stable color.
> KaiTi_B> Four can melt various materials: c)> Soda-lime glass, Ruhuo, barium-potassium, high borosilicate, lead, glass-ceramics, etc.
> KaiTi_B> The structure is the same as that of the large electric furnace. The innermost layer of the small electric furnace is zirconium corundum bricks, followed by clay bricks, insulation bricks, and insulation cotton. The outermost layer is supported by a steel frame.
> > KaiTi_B> Six & On-site Manufacturing&& Building an electric furnace is like building a house. It must be ensured that there are basically no brick joints, and it is not suitable to be transported by car. It is best to construct it on site.
> > KaiTi_B> KaiTi_B>Seven heating methods&& Heating with molybdenum electrode or tin oxide electrode. Each electrode requires cooling, and water cooling is better than air cooling.
> KaiTi_B> KaiTi_B> Eight & material utilization rate can almost reach %. Utilizing the principle of the conductivity of the glass liquid itself, the molybdenum electrode is heated from the inside out, which can ensure uniform and stable material quality. Like the large electric furnace, the material liquid utilization rate of the small electric furnace can reach almost %.
> > KaiTi_B> KaiTi_B>Jiuxiao electric furnace is simple to operate, easy to control, has low labor workload and low maintenance cost.
> > KaiTi_B> KaiTi_B>Ten&Flexible in use, the furnace can be shut down and put aside when not in use according to the order situation, and re-ignited when in use.
> > KaiTi_B> KaiTi_B> Eleven & Overhaul Cost
> > KaiTi_B> KaiTi_B> Overhaul will be carried out after one cycle of use. Steel frame, cooling water does not need to be moved. Wearing parts of electrical appliances must be replaced. Bricks of various types cannot be reused and must be purchased again. But the remaining zirconium corundum bricks can be sold to brick factories. Molybdenum electrodes may be added depending on the loss. The water jacket cooling the molybdenum electrode must be replaced.
WhatsApp
