Bosite refractory gold ore treatment technology, gold extraction method from gold-containing cyanide tailings, gold separation blanket machine

Bosite refractory gold ore treatment technology, gold extraction method from gold-bearing cyanide tailings, gold beneficiation blanket machine
The content of gold in placer gold ore is extremely low, and it must be enriched and purified through ore dressing to reach the level of smelting Requirements, therefore placer gold ore must be beneficiated after mining. The proportion of gold in placer gold ore is extremely large, which is..., while the specific gravity of sand and gravel is extremely small, only.... According to the principle of gravity separation, it is very easy to separate placer gold ore using gravity separation. Practice has also proved that the gravity separation method is The simplest, most effective and ideal mineral processing method for processing placer gold ore.
Gravity separation is the most important method for placer gold beneficiation, which also determines that placer gold equipment, placer gold separation equipment, and placer gold beneficiation equipment are mainly gravity separation equipment. So what are the gravity separation equipment? What kind of equipment does the placer gold gravity separation equipment mainly refer to? In response to these problems, Henan Bosite Machinery Manufacturing Co., Ltd. will reveal them to you one by one.
First of all, let me give you a brief introduction to gravity separation equipment. Gravity separation equipment is a mineral separation equipment that uses the difference in specific gravity between minerals and gangue. It is widely used and has the advantages of energy saving, high efficiency, and environmental protection. Gravity separation The equipment mainly includes jigs, shakers, chutes, centrifugal concentrators, etc.
Secondly, placer gold ore beneficiation equipment mainly refers to jigs. However, since various gravity separation equipment have certain restrictions on the selected particle size and selected particle size, the beneficiation of placer gold ores generally does not only use jigs. The machine is a kind of gravity separation equipment, and it also needs to be combined with equipment such as chutes and shakers to improve the applicability of the equipment and the sorting index.
Finally, let’s briefly introduce the advantages and disadvantages of these three types of placer gold equipment to facilitate customers’ choice. Jig selection of placer gold has the advantages of large processing capacity, high recovery rate, and good sorting effect, but it consumes large amounts of water and the amount of sand produced is not as good as that of the chute. The chute has a large sand output and moderate water consumption, but its recovery rate is the lowest. The recovery rate of the shaking table is high and the sorting effect is also very good. However, its processing capacity is the smallest and it is difficult to meet the requirements for large-scale placer gold beneficiation. Therefore, generally two or three of them are used in combination to obtain better placer gold beneficiation. Sorting indicators and economic benefits.
The specific combined processes include: chute jig shaker combined process, chute jig combined process, jig shaker combined process, etc. In short, the jig is an indispensable piece of equipment in placer gold beneficiation. It has unique placer gold beneficiation advantages and is widely used in large and medium-sized placer gold ore beneficiation plants and large gold mining ships.
Henan Bosite Machinery Manufacturing Co., Ltd. is a manufacturer specializing in the production of gold ore beneficiation equipment and a professional supplier of designated production of complete sets of mineral processing equipment with daily processing tons. Can provide users with project design, ore identification, small tests, pilot tests, and process flow:
<=_