Shanghai Nuoguang produces MBW07-Y0.75-C2.5 continuously variable transmission

Shanghai Nuoguang produces and supplies one-stage gear transmission BC continuously variable transmissions to all parts of the country, with a speed range of r and a power output torque speed ratio. This series of stepless speed changers are equipped with a series of ordinary three-phase asynchronous motors as standard. The motors are pure copper motors. If you need frequency conversion, braking, explosion-proof, variable frequency braking, etc. motors, please contact us or make a note yourself. This series is widely used in food machinery, printing, paper machinery, rubber, plastic machinery, ceramic machinery, pharmaceutical machinery and various work production lines that require variable process parameters and continuous changes in speed. It also has the ability to trial-produce new products. In the process, the optimal working speed of the machine is explored. Continuously variable transmission model:
Horizontal: BBBBBBB Vertical: BBBBBBB.
Transmission range:
Basic type: r/
Transmission with one-stage gear reduction (=.): r/
Transmission with two-stage gear reduction (=.): r/
Technical parameters:
Input power:.~
Speed adjustment range:~r/
Allowable torque:.
Product features:
The &B series continuously variable transmission has been used in practice for many years and has proven to be unique among many continuously variable transmission families. Due to the design structure of this series of products, it has the characteristics of easy operation and stable transmission.
, B speed changer has high speed regulation accuracy, and the speed regulation accuracy is .
, Large height range and speed adjustment range =.
, All transmission parts of this series of transmissions have been strictly processed, precision processed, ground, and have good contact and lubrication properties, so they operate smoothly, have low noise and have a long service life. long.
The biggest feature of the B transmission is that it can be effectively used in combination with various gear reducers, cycloidal reducers, worm gear reducers and reduction motors, thereby increasing the output torque and realizing various different The minimum and maximum output speed of the occasion, with good adaptability.
The output torque and power of the B transmission change with the change of the output revolutions, and have the mechanical characteristics of variable torque and variable power.
&The manufacturer hereby reminds you of several precautions when using a continuously variable transmission: The speed of the continuously variable transmission must be adjustable when it is turned on. The handwheel should not be turned too fast when adjusting the speed. It is strictly prohibited to turn the adjustment wheel when it is stopped. Speed hand wheel. The speed regulating limit screw under the handwheel has been adjusted at the factory and must not be adjusted arbitrarily to avoid damage to the transmission parts. The traction oil of the continuously variable transmission is filled with enough traction oil when it leaves the factory. There is no need to add more. The transmission must not be started and used without oil. The ambient temperature is ℃~+℃, the internal temperature rise of the machine shall not exceed ℃, and the maximum temperature shall not exceed ℃. If the motor is replaced, attention should be paid to retaining the original motor flange with oil seal to prevent lubricating oil from flowing into the motor. The continuously variable transmission is suitable for normal use. , run in both opposite directions, but the rated torque must not be exceeded. The use of continuously variable transmission and worm gear reducer is only suitable for power transmission and cannot be self-locking.