Copper Foil Mylar Conductive Tape Conductive Mylar Copper Foil Tape

Copper foil Mylar conductive tape Conductive Mylar copper foil tape
Copper foil Mylar tape, electronic copper foil tape, double conductive copper foil, single conductive copper foil
[Description]: This product It is composed of copper foil with a purity higher than .%, acrylic pressure-sensitive adhesive, and release paper. Common specifications: substrate thickness: .~., adhesive thickness: .~. It has the functions of strong adhesion, good conductivity, heat preservation, heat insulation, electrical signal shielding, magnetic signal shielding, etc.
[Use]: Suitable for various electronic products such as transformers, mobile phone C monitors, notebook computers, and copiers. Where electromagnetic shielding is required.
[Technical indicators] Copper foil tape: Base material thickness: .. Adhesive thickness: .~ Colloidal component c=r>
Peel strength c=r>
Temperature resistance c= r>
Tensile strength c=r>
Elongation of ordinary pressure-sensitive adhesive and conductive gram pressure-sensitive adhesive c=r>
.~.c=r>
℃℃ c=r>
.～.c=r>
%～%
Copper foil double-sided conductive tape Copper foil double-sided conductive tape
Product introduction:
[Product Name]: Conductive Copper Foil Double Conductive Copper Foil Tape Shielding Copper Foil
[Specifications]: Width and Length (meters)
[Thickness]: Glue thickness, copper thickness, total thickness.
& Product Description : The purity is higher than .%. Its function is to eliminate electromagnetic interference, isolate the harm of electromagnetic waves to the human body, and avoid unnecessary voltage and current from affecting functions. In addition, it has a good effect on electrostatic discharge after grounding. It has strong adhesive force and good electrical conductivity, and can be cut into various specifications according to customer requirements.
Usage: Suitable for various types of transformers, mobile phones, computer C monitors, laptops, copiers and other electronic products where electromagnetic shielding is required.
&Copper foil tape is a kind of metal tape. It is mainly used for electromagnetic shielding. It is divided into two types: electrical signal shielding and magnetic signal shielding. Electrical signal shielding mainly relies on the excellent conductive properties of copper itself, while magnetic shielding requires copper. The conductive material "nickel" on the adhesive surface of foil tape achieves magnetic shielding effect, so it is widely used in mobile phones, notebook computers and other digital products. The general inspection properties of the most commonly used copper foil tapes currently on the market are as follows:
Material: .%
Base material thickness: ..
Adhesive thickness: .~.
Colloid Ingredients: ordinary pressure-sensitive adhesive (non-conductive) and conductive acrylic pressure-sensitive adhesive
Peeling force: .~./ (degree reverse peeling force test)
Temperature resistance ℃℃
Tensile strength.~./
Elongation %~%
Common knowledge about copper foil tape:
The test conditions are normal temperature ℃, and the relative humidity below ℃ adopts the results tested by the United States.
. When storing goods, please keep the room dry and ventilated. Domestic copper is generally stored for a month, while imported copper can be stored for longer and is less susceptible to oxidation
. The product is mainly used to eliminate electromagnetic interference and isolate electromagnetic waves from affecting the human body. The hazards are mainly used in computer peripheral wires, computer monitors and transformer manufacturers.
.Copper foil tape is divided into single-sided adhesive tape and double-sided adhesive tape. Single-sided copper foil tape is divided into single-conductor copper foil tape and double-conductor copper foil tape. Single-conductor copper foil tape means that the adhesive surface is not conductive, and only the other side of the copper is conductive, so it is called single conductor, that is, single-sided conductivity. Double-conducting copper foil tape means that the rubber-coated side is conductive, and the copper itself on the other side is also conductive, so it is called double-conducting, that is, double-sided conductive. There are also double-sided adhesive copper foil tapes that are used to process more expensive composite materials with other materials. The adhesive surface of double-sided adhesive copper foil is also divided into conductive and non-conductive. Customers can choose according to their own conductive needs. To choose.
Conductive copper foil double-sided tape Double-conductive copper foil tape
Copper foil tape is mainly used for electromagnetic shielding, divided into two types: electrical signal shielding and magnetic signal shielding. Electrical signal shielding mainly relies on copper itself. Excellent conductive properties, while magnetic shielding requires the conductive material &nickel&r on the rubber surface of the copper foil tape to achieve the magnetic shielding effect, so it is widely used in mobile phones, notebook computers and other digital products. The general inspection performance of the most commonly used copper foil tapes currently on the market is as follows: Copper foil tape material: .% Base material thickness: .Adhesive thickness: .~Colloidal ingredients: ordinary pressure-sensitive adhesive (non-conductive) and conductive acrylic Pressure-sensitive adhesive peeling force: .～.／(degree reverse peeling force test) Temperature resistance ℃℃ Tensile strength .～.Elongation%～%