BZ20 Plastic Surface Gloss Tester

& .>B high gloss gloss detector gloss meter

Application
Suitable for surface gloss of high gloss coatings, paints, plastics, building materials, such as automotive topcoats, polished metals and plastics Measurement of value.

Features
. Press the buttons to set the number, which is more accurate.
.Intelligent storage of calibration values, no need for frequent calibration.
.Built-in battery, equipped with external rechargeable power supply.
.Small and portable
.Long-life light source, good stability, and ready to test.

Parameters
The instrument indicators comply with the national metrological verification regulations for first-class gloss meters.
, Display range: ..gloss unit
, Indication error: less than .gloss unit
, Stability: .gloss unit/minute
, Instrument size: &
, Measuring window size: & elliptical
, Working voltage: (four rechargeable batteries)

Precautions for high-gloss gloss meter:
. Avoid direct exposure to strong light during use. Otherwise it will affect the measurement accuracy.
.The standard plate provided with the instrument should be kept clean. Do not touch the surface with your fingers. There are stains on the surface, which will affect the measurement accuracy. You can wipe it with lens cloth or absolute alcohol.
.The battery power is exhausted, the instrument prompts that the battery is under voltage, and the display shows & &r. The battery needs to be replaced. Open the battery cover, take out the battery and replace it. Pay attention to the polarity of the connecting wire. If the battery is exhausted, it should be replaced in time, otherwise it will take a long time. Storage, old batteries may leak waste liquid, causing damage to the instrument. If the instrument is not used for a long time, the battery should be removed and kept properly
< =cb.c/b_?__r__