Year1
- 适用范围:：
- 各种胶合板，细木工，三层实木复合木地板，贴边板等
- 注意事项：：
- 操作时工作人员需穿戴防护工作服、手套和口罩
- 注意事项：：
- 作业时不慎接触到皮肤，应及时用清水冲洗干净
1. Product performance introduction:
Special insect repellent for plywood is a systemic, anti-loss, concentrated type insect repellent for boards that integrates anti-killing. It can It can be quickly dissolved and dispersed in resin glue (urea-formaldehyde glue, phenolic glue, glue after melting melamine bakelite glue powder). Its polymeric active ingredients can quickly penetrate into the fiber tissue of the veneer through glue diffusion. It can quickly destroy the inside of the veneer. The active insect bodies and bacterial interference with the unhatched eggs in the single board prevent them from hatching. B-type plywood special insect repellent is easy to operate and does not affect the bonding strength of the board and the curing speed of the resin glue. It is an ideal insect repellent for plywood, joinery, veneer and other artificial boards.
2. Scope of application:
Mainly suitable for Chinese pink beetles, Japanese pink beetles, and flat beetles commonly found in various plywood, joinery, three-layer solid wood composite wood flooring, welt boards and other artificial boards. Killing and protection of beetles.
3. Product features:
Diffusion of B-type plywood special insect repellent into the board through glue solution can quickly generate insoluble silicon compounds after solidification, which has strong insecticidal power. It is not susceptible to volatilization and loss due to the influence of hot pressing temperature, and has strong specificity against Chinese mealy bugs, Japanese mealy bugs and flat mealy bugs. It can completely destroy and interfere with the hatching conditions of its eggs.
4. Usage method: Conventional glue addition method, dry and wet veneer soaking method and fumigation method
For the glue addition method, it is recommended to use a concentration of %% of the glue
When using, type B is directly used The special insect repellent for plywood can be added and stirred according to %% of the total amount of glue (after mixing with flour)
. The wet veneer soaking method recommends a concentration of %%
The standard is that the water surface completely covers the veneer. . When the soaking time is small
, the recommended concentration for the dry veneer soaking method is %%
The standard is that the veneer is completely soaked with the solution. The soaking time is 10 minutes
. For fumigation treatment, it is recommended to lay and stack the plywood neatly before applying uniform brushing or spraying (the recommended concentration is %%), and then seal it with a plastic sheet for an hour and then open it for ventilation and drying ( It can be packaged after several hours (depending on the air temperature).
5. Precautions:
. Workers need to wear protective overalls, gloves and masks during operation
. If you accidentally come into contact with the skin during operation, you should rinse it with clean water in time
. The treated boards are not suitable for use as food packaging boxes
. Keep away from children when operating and storing. Do not throw away used chemicals and waste materials.
Effective use period: months
WhatsApp
