Supply MBL15-Y1.1-C3.3 continuously variable transmission to Nuoguang Professional

&Shanghai Nuoguang supplies to all parts of the country equipped with one-stage gear transmission BC continuously variable transmission, with a speed range of r and a power output torque speed ratio. This series of stepless speed changers are equipped with a series of ordinary three-phase asynchronous motors as standard. The motors are pure copper motors. If you need frequency conversion, braking, explosion-proof, variable frequency braking, etc. motors, please contact us or make a note yourself. This series is widely used in food machinery, printing, paper machinery, rubber, plastic machinery, ceramic machinery, pharmaceutical machinery and various work production lines that require variable process parameters and continuous changes in speed. It also has the ability to trial-produce new products. In the process, the optimal working speed of the machine is explored.
Continuously variable transmission model:
Horizontal: BBBBBBB Vertical: BBBBBBB.
Transmission range:
Basic type: r/
Transmission with one-stage gear reduction (=.): r/
Transmission with two-stage gear reduction (=.): r/
Technical parameters:
Input power:.~
Speed adjustment range: ~r/
Allowable torque:.
&Shanghai Nuoguang continuously variable speed The working principle of the machine: the tapered driving wheel and pressure plate are pressed by a set of disc springs, and the input shaft and the driving wheel are connected with a key to form a pressing active device. Therefore, the friction wheel rotates while rotating, and drives the planet carrier to rotate through the central axis of the planetary friction wheel and the slider bearing. Finally, the working radius of the friction between the planetary friction wheel and the driving wheel, the pressure plate and the fixed ring, and the speed regulating cam is evenly changed to achieve stable stepless speed change.
&The speed adjustment method of the continuously variable transmission: handwheel speed adjustment: there are two types: fast and slow handwheels and pointer handwheels. Equipped with right-angle speed adjustment and electric speed adjustment.
& Here, Nuoguang manufacturer reminds you of some precautions when using the continuously variable transmission: The speed of the continuously variable transmission must be adjustable when it is turned on. The handwheel should not rotate too fast when adjusting the speed. It is strictly prohibited when it is stopped. Turn the speed control handwheel. The speed regulating limit screw under the handwheel has been adjusted at the factory and must not be adjusted arbitrarily to avoid damage to the transmission parts. The traction oil of the continuously variable transmission is filled with enough traction oil when it leaves the factory. There is no need to add more. The transmission must not be started and used without oil. The ambient temperature is ℃~+℃, the internal temperature rise of the machine shall not exceed ℃, and the maximum temperature shall not exceed ℃. If the motor is replaced, attention should be paid to retaining the original motor flange with oil seal to prevent lubricating oil from flowing into the motor. The continuously variable transmission is suitable for normal use. , run in both opposite directions, but the rated torque must not be exceeded. The use of continuously variable transmission and worm gear reducer is only suitable for power transmission and cannot be self-locking.