Year1
- 执行标准：：
- 国家标准GB18582-2001
- 注意事项：：
- 如果需要处理已经上漆的产品，请务必先将木材表面漆膜清理干净后再使用本产品
- 注意事项：：
- 因本产品系高分子处理剂故请避免和还原性、酸性，碱性以及有机溶剂等物质混合
1. Product Introduction:
&Muzhibao Concentrated Wood Mildew Remover is a high-content wood mildew remover newly developed by Weixin Linhua. It has fast mold elimination speed, does not destroy the strength of wood fiber, does not change the original color of wood, is non-toxic and has no irritating smell, is safe and environmentally friendly, and is mainly used for wood dampness or moisture caused by high temperature and humidity in the rainy season. Mold and mildew spots that appear on boards, wooden craft products, packaging boxes, pallets, furniture boards, etc. due to high moisture content caused by improper storage of wood and delayed drying. The color of the treated wood can restore the original color of the wood. , its treated area can ensure that there will be no secondary growth of mildew permanently and a series of advantages. Muzhibao concentrated wood mildew remover is currently the most effective, highest content, strongest penetration depth, and most convenient to use on the market. Concentrated wood mildew removal product.
2. Main ingredients:
The main ingredients of Muzhibao concentrated wood mildew remover are: mold decomposition oxidant, mold removal reducing agent, surfactant, compound antibacterial agent, etc. It does not contain formaldehyde, heavy metals and other toxic and harmful substances. It complies with the new European standards for export.
3. Scope of application:
Muzhibao concentrated wood mildew remover is mainly suitable for diseases caused by high temperature and humidity during the rainy season. Trichoderma, Penicillium, and Aspergillus niger may appear due to moisture content in the wood due to improper storage or improper drying. Aspergillus flavus, white rot fungus, or trichoderma may appear due to high flour protein added to the plywood glue. It is widely used in the removal of mold and other mold hyphae, which is widely used in boards, furniture, wooden handicrafts, packaging boxes, pallets and other finished products, semi-finished products and other wooden materials.
Four: Implementation standards: National Standard B.
Five: Use Method:
Before operation, first clean the attachments on the wood surface. You can use brushing, spraying, soaking, vacuum pressurization and other operating methods:
For the slight mildew and mildew spots that have just appeared on the wood surface. , mildew spots and other phenomena, when using the brushing method: Use a brush or sponge to evenly apply Muzhibao concentrated wood mildew remover (can be appropriately diluted with water according to the mildew situation, the dilution ratio is one part mildew remover to one part water) The standard is that the wood surface is completely wetted), and the whole thing is covered with a plastic sheet (preservation film). Place it in a well-ventilated place to cool and dry naturally for several hours. After the wood mildew is eliminated, subsequent processing can be carried out.
When the wood is severely moldy, has a long mildew cycle, is moldy on the surface or has completely penetrated into the wood fiber conduit, the wood mold hyphae must be treated twice. When using the brushing method: Use a brush or sponge to evenly apply the Muzhibao concentrated wood mildew remover stock solution for several times (the interval between each application is an hour. When operating, the wood surface is completely wetted as a standard), and the entire surface is covered with plastic. Cover with cloth (preservation film). Place in a well-ventilated place to cool and dry naturally for an hour. After the mildew on the wood is eliminated, subsequent processing can be carried out. When the soaking method is used for spots and other phenomena, water can be appropriately diluted according to the mold situation. The dilution ratio is one part mildew remover to one part tap water. The soaking time is ~ minutes, and the mildew spots on the wood will disappear and the original color of the wood will be restored.
. For wood moldy conditions that are severe and have a long mildew cycle, surface rot or wood mold mycelium has completely penetrated into the interior of the wood fiber conduit, when using the soaking method, water can be appropriately diluted according to the mildew situation. The dilution ratio is one part for mold removal. Soak a portion of the tap water with the agent. The soaking time is about 30 minutes, the wood mildew spots will disappear and the original color of the wood will be restored.
Six: Precautions:
Because this product is a polymer treatment agent, please avoid mixing with Mixing of reducing, acidic, alkaline and organic solvents.
If you need to deal with painted products, be sure to clean the paint film on the wood surface before using this product.
The agent can be recycled. When using the soaking method, please ensure that the agent completely covers the wood and ensures the fluidity of the agent so that the agent can completely penetrate into the wood. It is recommended that the number of times of blending the agent should not exceed three times. If you continue For use, it is recommended to reactivate the original drug by adding no less than % of the total amount of the drug solution to ensure that this drug continues to exert its effect.
, below ℃, this product will crystallize, please store it at ℃ The above places can be placed in a cool place, away from direct sunlight or high temperatures, to ensure product efficacy and stability.
Effective use period at room temperature: months.
WhatsApp
