Advantages of dust bag

The appearance of unfinished filtration efficiency is high. The general industrial filter material is depth filtration. It relies on establishing a dust layer on the surface of the filter material to achieve effective filtration. The establishment has long effective filtration time, large resistance, low power, incomplete interception, high filtration and backflush pressure, frequent cleaning, high energy consumption, short service life, and large equipment footprint. When using film-coated dust bag filter material, dust cannot penetrate the filter material. It is surface filtration. Whether it is coarse or fine dust, all is deposited on the surface of the filter material, that is, the filtrate is intercepted by the pore size of the membrane itself. There is no initial filtration period. It is effective filtering and is filtering nearly 100% of the time.


Low pressure, continuous flux operation. Once the traditional depth filtration filter material is put into use, dust penetrates and a dust layer is established, and the air permeability decreases rapidly. During filtration, the dust accumulated inside forms a clogging phenomenon, thereby increasing the resistance of the dust removal equipment.

The fine pore size and low viscosity of the film-coated filter material make the dust penetration rate close to zero. It provides the best filtration efficiency when it is put into use. When the dust deposited on the surface of the film filter material is< br/>
When the filter material reaches a certain thickness, it will automatically fall off and be easily cleaned, so that the filtration pressure is always kept at a very low level, the air flow is always kept at a high level, and the operation can be continued.


Simple dust removal. The operating pressure loss of any filter material directly depends on the amount of dust remaining or staying on the surface of the filter material after cleaning, and the length of cleaning time. It has very excellent dust cleaning properties, and the dust can be completely removed every time. The dust layer will not cause clogging inside the filter material, will not change the porosity and mass density, and can always maintain low-pressure loss operation.



Long life. No matter what cleaning mechanism

is used, the film-coated filter material can achieve a total advantage of

. It is a kind of filtration that fully reflects the filtration effect of the dust collector design function. material. So the cost is low. The film-coated filter material is a strong and soft fiber structure, which is compounded with a strong base material. Therefore, it has sufficient mechanical strength and excellent dedusting properties, which reduces the dust cleaning intensity. It can be used for a long time under low and stable pressure loss and extends the life of the filter bag.


Use
Dust bag
Filter material, dust cannot penetrate the filter material, it is surface filtration, whether it is coarse or fine dust, all deposits on the surface of the filter material , that is, the filtrate is intercepted by the membrane's own pore size. There is no initial filtration period. It is effective filtration from the beginning and is in filtration nearly 100% of the time.