Year1
- 外形尺寸：
- 96mm×96mm×72mm
- 重量参考值：
- 0.48KG
Overview
B electrical contact temperature measurement device is an intelligent device for electrical contact temperature measurement used in high, medium and low voltage power systems (, and...) and electrical contact temperature measurement devices that have higher temperature requirements. It is a modern high-tech product that integrates online temperature measurement, data acquisition, data analysis and control functions. All its technical indicators can reach international standards. The B electrical contact temperature measurement device has the ability to collect contact temperatures online (the number of contacts can be selected), and the data continuity unit can be selected according to on-site conditions. The device provides a communication interface that can be connected to a computer monitoring system. It supports R interface DBR communication protocol or other designated communication protocols (optional), and the communication baud rate can be set. B adopts a variety of anti-interference measures in its design to ensure stable operation in the power system. Panel protection level, shell protection level.
Main functions
)&Real-time data display of multi-channel wireless measurement temperature.
)&Alarm temperature upper and lower limit setting and data display.
)&Multi-channel measured temperature temperature rise data display.
)&Event recording function:&Record the latest twelve ultra-high temperature alarm data, all data are recorded with time stamps.
)&Displays the current date and time of the system, and the date and time have an automatic conversion function between years and years.
)&Communication address and baud rate setting function.
)&Contact temperature measurement wireless collection, storage, display and alarm functions (requires the assistance of sound alarm or light alarm equipment).
) Data communication function, all data can be uploaded to the upper level collector or to the host computer system through the data communication bus.
Technical Parameters
) Working power supply: ~/D~.
)Temperature measurement channel: stand-alone system, wireless mode supports 1 temperature measurement point, infrared mode supports 1 temperature measurement point.
) Working environment temperature: ℃ ~ & ℃ Ambient temperature measurement range: ℃ ~ + ℃.
)Working environment humidity: &%RH.
)Alarm output port: passive output (load &).
)Battery life: years.
) Communication interface: R (isolated), using DBR& protocol, one start bit, eight data bits, no parity, and one stop bit. The baud rate can be set to b, b, b, b.
)The open distance between the wireless transmitting module and the receiving module: , & meters, & meters.
)The maximum distance between the infrared transmitting module and the receiving module is meters.
)R communication distance: & meters.
) Contact temperature measurement range: ℃ ~ ℃.
) Temperature accuracy: &°C.
)LCD display resolution: ℃.
Installation dimensions and wiring
., B composition
) Data acquisition terminal (host): It has data display and setting functions, and can locally view the operating status, view or set operating parameters) temperature Data receiver (already built into the data acquisition terminal)) contact temperature sensor, typically configured to a circuit (can be configured with up to circuit contacts, optional).
.. Dimensions of data collection terminal
Overall dimensions and opening dimensions
.. Installation method of data collection terminal
When installing, first remove the installation buckles at the four corners of B , push B into the mounting hole from the front of the panel, then install the mounting clip along the groove of the device from the rear and squeeze it tightly against the panel. At this time, the device will be firmly fixed on the panel. Installation precautions: There are no user-adjustable components inside this product, please do not disassemble it during installation. Do not work with electricity on. Avoid placing the device near strong interference sources, radiation sources, heat sources and places with a lot of dust.
Contact temperature sensor
It can measure ~ point temperature test points at the same time. When the measured temperature is greater than the set trip and alarm value, the device outputs a trip or alarm signal.
..Strap-type contact temperature sensor
.., Installation dimension diagram
Dimension&H
Dimension H
Dimension H
Dimension H
.., features and parameters
.The plastic watch strap shell is made of temperature-resistant (℃~&℃) flame-retardant material and is waterproof.
.The thermal sensor in the shell is in close contact with the contact body and can accurately measure real-time temperature.
.The transmitting and receiving distance when the wireless module is open, & meters, & meters.
.The infrared module sends and receives data with directionality, and the sending and receiving distance is meters.
.& Temperature measurement range ℃ ~ ℃.
.., Installation of contact temperature sensors
The strap-type contact temperature sensors are installed on the busbars of the inlet and outlet rooms of the switch cabinet respectively. The installation method is bundled installation.
①. Attach the strap-shaped temperature measurement module to the object to be measured.
②. Pass one end of the strap-shaped temperature measurement module through the other end.
③. Until the strap-like temperature measurement module is tightly tied to the object to be measured.
④. Cut off the extended part of the strap.
⑤. The cabinet must be powered off during installation.
.., Ring contact temperature sensor
.., Installation dimension diagram
Dimensions: outer circle &h, inner circle &h& thickness (unit:)
.., features and parameters< br/> ①． The ring body is made of insulating and flame-retardant (imported bakelite) material.
②． Can have built-in high-capacity lithium battery.
③． The thermal sensor inside the ring is in close contact with the static contact arm and measures the contact temperature.
④. It can draw power from the induction power supply within the range of ~.
⑤. The weight is...
.., Ring contact temperature sensor installation
The ring contact temperature sensor is installed on the static contacts of the circuit breaker on the incoming and outgoing lines of the switch cabinet.
Warm reminder: [Electrical contact online temperature measurement device B] is provided by [Zhongshan Kangbaote Electric Power Technology Co., Ltd.]. If you want to know more about the related information about [Electrical contact online temperature measurement device B], Check out the latest company news
.
WhatsApp
