Energy storage price

Energy accumulators can be mainly divided into four categories, spring energy accumulators, air bag energy accumulators, inflatable energy accumulators, and gravity energy accumulators. But the most common type of energy storage device in the entire energy storage market is the airbag energy storage device. Let's work with the editor to understand the principles of airbag energy accumulators
The main components of airbag energy accumulators are
1. Shell
2. Inflation valve
/> 3. Limit valve
4. Air bag.
An inflation valve is installed on the outer upper end of the entire shell of the energy storage device, which is mainly used for inflating the air bag. Generally, it is filled with nitrogen. The function of the limit valve is to limit the entire air bag, mainly to control the position where the air bag expands, and to prevent it from entering the oil outlet and causing equipment failure. We can pre-charge an appropriate amount of pressurized inert gas before starting work, and then close the filling valve. During the work, if it is found that the pressure in the entire system exceeds the pressure in the air bag, then the pressure oil will actually enter the middle of the air bag and the casing through the limit valve at the oil inlet. At this time, we must The main purpose of a proper compressed air bag is to effectively store pressure oil. On the contrary, if the pressure in the entire system is relatively small, the pressure oil needs to be replenished as soon as possible, but in this case, the air bag will expand and the pressure oil will flow out through the limit valve.
The above is the working principle of the airbag energy storage device introduced by the editor. I hope it will be helpful for everyone to understand the energy storage device.
This article comes from