Supply Anhui copper descaling agent 15553754717

Copper descaling agent 1. Main uses
Mainly used for carbonate scale generated during the operation of industrial, domestic and power station boilers, sewage treatment circulation pipes, condensers, central air conditioners, deep well pumps, heating jackets and other equipment. , air conditioning and other equipment copper pipe scale removal.
2. Performance characteristics
Simple operation, no clogging, saving time and money
Simple operation: It can be operated by using existing equipment and technicians.
No clogging: During the cleaning process, the chemical reaction between the liquid and the scale will cause the scale to dissolve into the liquid, without causing flakes to fall off and causing clogging.
Save time: The fastest only takes a few hours, the most is hours.
Cost savings: The cost is lower than other cleaning costs.
Low corrosion rate: For cleaning ferrous metals and non-ferrous metals, the corrosion retardation rate is above.
3. Product indicators

Model
Descaler
Descaler

Appearance
White solid
Reddish liquid

Density/
Filling


Value
(aqueous solution)


Water-insoluble matter



Scale removal rate (carbonate scale)



Corrosion inhibition rate



Dissolution rate ℃


4. Instructions for use
(1) Dosage
The dosage of descaling agent is ~ calculated based on the volume of the cleaning part (add ~ per cubic meter of water).
Descaling agent stock solution: dilute and use.
During cleaning, the value should be maintained at around ~., if the value cannot reach ~., you should continue to add chemicals.
(2) Usage method
Usage temperature water temperature ℃ ~ ℃, not higher than ℃.
The cleaning time is generally about 1 hour, and can be increased or decreased appropriately according to the scaling conditions.
When cleaning the equipment, open the air vents to prevent air blockage.
If the chemical solution value has been around ~. during the cleaning process, it means that the descaling has ended.
After cleaning, drain the cleaning fluid. Then flush the pipes one by one with water to check whether there is any blockage. If there is an original blockage, use manual or pipe dredging machines to clear it to ensure that each pipe is unobstructed and the equipment operates normally.
5. Precautions
. If the liquid comes into contact with the skin during cleaning, just rinse with clean water.
. When the equipment is running normally again after cleaning, the anti-scaling and anti-scaling agent produced by our company can be added at a concentration of .~r. This product can inhibit scale and scale.