Custom-made work clothes manufacturers say that it turns out that there are so many details to pay attention to when cutting clothes.

Whether the clothing is good or not depends on the tailoring of the clothing. The fabrics and everything are in place, but there is a problem with the cutting. Is it a big loss? Today, the editor of a custom-made industrial binding manufacturer will talk to you about clothing cutting and production.
, typesetting
Typesetting is very important, including yarn direction, reverse smoothness, and fabric ratio. Nowadays, many factories use super typesetting software on computers, which is more efficient and suitable for typewriters to calculate materials. For real practical operations, manual typesetting is best. The processing fee you save by a few percent will not be less than what you earn!
. Recruit a good tailor
A good tailor can save tens of thousands of yuan a year on fabrics. One centimeter is wasted on a piece of clothing, and the overall waste is huge. If you produce 100,000 pieces, the rice cloth will cost 10 yuan. Ten thousand yuan of money was wasted. If the wholesaler supplies materials to the factory for production, it is best to be on time, because many factories will not return the fabric they save to you. Let me teach you a little trick: hire a good cutting master to draw a circle for an interview. If he can cut the circle out in one stroke without deforming, that means he has the basic qualifications of a good tailor.
, Pulling the cloth
The cloth should be pulled neatly and not stretched. If it is stretched by a centimeter, a lot of money will be wasted in the next year. Pay attention to yarn drawing, short code, color difference, fabric quality, front and back. When the fabric is purchased in stock, there will be short code and gap. I encountered a batch of fabrics that actually only have more, but less than 2% is normal. .
, Avoid color difference
Knitted fabrics have different cylinder numbers, but sometimes the same cylinder will also have cylinder differences. In order to avoid color difference, the editor of the custom-made tooling manufacturer will give you some suggestions
Number the cutting pieces
b. Do not connect the ends of the cloth to avoid duplication of numbers. If there are more pieces of cloth left, you can assign a separate number
. Personnel who do the numbering must be serious and responsible. Wrong knitting. I have seen that if there is too much knitting, one piece will be thrown away. If there is too much knitting, one piece will be added.
When drawing cloth, please pay attention to the yin and yang colors of the same cloth.
Special note: Even if the fabrics are of the same layer, each side will have the same color, but the color will not be much different. There are also some cloths that change color when exposed to air. Fabrics will also change color when moisture returns.
, Open cutting
When cutting, you must not cut, miss or deviate. To check whether the cut piece is standard is to fold the front or back piece in half. If it is symmetrical, it is considered a good cut.
, subcontracting
When arranging packages and subcontracting, separate numbers clearly in the forward and reverse directions. Printing and embroidery should be divided into craft singles and garments. Do not divide them incorrectly. Do not take the wrong number plate and tie the number correctly.
The editor of the custom-made workwear manufacturer adds one point: before cutting, the correct process sheet, sample clothes, and color cards for each style must be attached correctly, so that you can avoid making mistakes when cutting, because there is no way to rework the cutting. , and avoid unnecessary losses.
Wuhan Yigong Yishan Professional Clothing Co., Ltd. is mainly engaged in work clothes in the following industries: mechanical processing, construction, logistics, transportation, security clothing, coal mining, automobile maintenance
warehousing and packaging, electric power, printing, papermaking, petrochemical industry
Company address: Hubei No., Hankou North Avenue, Panlongcheng Economic Development Zone, Huangpi District, Wuhan City, Province
Service area: Hubei|Hunan|Wuhan|Wuchang|Hankou|Changsha|Hanyang|