Guizhou construction worker job responsibilities, construction surveying zero-based training, southern surveying and mapping software instrument learning

Job Responsibilities of Guizhou Construction Workers Zero Basic Training in Construction Surveying Southern Surveying and Mapping Software Instruments Learning Responsibilities of Construction Workers What should technicians do at the construction site?
Planning for laying out and picking up materials, writing technical briefings, sampling raw materials on site, sending them for inspection, on-site quality inspection, filling in concealed information, reviewing templates for steel bar cutting orders, checking dimensions and elevations, etc. But in the beginning, you only need to follow the foreman to complete the tasks assigned by the foreman. Just the task.
First, let’s talk about the full-time surveyor setting out the main axis and setting out the elevation control points. After that, the technician must master the basic skills of the pendant. It is impossible and unrealistic to rely on theodolite all the time. Then positioning and setting out the wiring for residential and office buildings is much simpler. Industrial plants are much more complicated.
When measuring the wire size, be sure to avoid using a small ruler one foot at a time (meter rulers are commonly used on construction sites) to avoid accumulation of errors. In addition, when the height difference between two points is large, the error is usually much smaller when measuring the slope distance and calculating the height difference between two points using the Pythagorean theorem. Remember the key points that the teacher told you when you were learning to measure: first work as a whole and then break it down into parts. Always review the previous step if you didn’t do the review. The next step cannot be measured and each step must be reviewed.
Measuring and setting out lines is especially important during construction. Your negligence may cause very large economic losses. Nowadays, the measurement and setting out at the construction site is not as formal as in the school measurement practice, where the measuring distance has a front ruler, a back ruler, readings and records. Often, the foreman and technician just go to set out the line, and then a worker is randomly called on site. Help, this is really not appropriate, you can't
Ask the project manager to equip enough professionals to accompany you in positioning, but you must be cautious and cautious before running back and forth. It is generally the job of technicians to give elevations on construction sites. It doesn't necessarily matter who you are when you look at the leveling ruler. You should pay attention to the front and rear pitch of the tower ruler, which has a great influence on the observation results. Another thing is that it is difficult for non-professionals to grasp the point when the tower ruler is lowered. It wouldn't be surprising at all if you don't repeatedly remind me that the difference is a few millimeters.
There is another saying that is circulated on the construction site. Although it is not completely correct, it can be regarded as a magic weapon for self-protection of surveyors. The triangle should be small and the line should be thick. This means that when drawing the red triangle for the finished elevation, do not draw too big the ink line and the ink line. Be thicker. Hehe, just figure it out for yourself.
As a construction site technician, you must be skilled in the use of total station, level, theodolite, ink fountain, and pendant. Besides, when it comes to material planning, no matter whether the estimator mentions it or not, as a technician, you have to do it yourself and do the calculation again. When calculating the actual consumption, don’t look at the content of the budget quota. Quotas are compiled based on various project categories. Some quota sub-items have content that is not used in actual construction and some are not. For example, if the design of ceramic tiles and marbles already has given size specifications, you can actually arrange the number of half bricks including the half bricks that need to be cut. As long as you pay attention, you can mention the quantities very accurately. In this way, when you go to the site for inspection during construction, you will be confident and can find problems at once.
Nowadays, steel bar design generally adopts the atlas. I just learned the reinforced concrete course and it should be faster than others are familiar with. When mentioning the steel bar materials, pay attention to the amount of steel bar joints.
Contact number QQ
The training objectives of construction surveyors are to enable students to have the professional theoretical knowledge and professional skills that surveyors should have through intermediate technical theoretical training to meet the job requirements.
The training targets relevant personnel who intend to engage in this profession.
Learning content for construction surveyors
Basic knowledge of construction
Example drawings of architectural drawing recognition projects
Flat method, building construction and materials, building structure construction technology, construction organization design, etc.
Basic software Lesson
Tianzheng
Professional course hand calculation of steel bars
Professional course concrete structure construction
Professional course Glodon steel bar construction sample copy
Study of steel bar flat method atlas

Three-dimensional modeling of foundation columns, beams, slabs, walls and other components

Reinforcement cutting calculation for foundation columns, beams, slabs and walls and other components

Foundation columns, beams, slabs and walls and other components Detailed arrangement of steel bars

Rapid three-dimensional modeling of 3D identification of foundation columns, beams, slabs, walls and other components
(
) Professional software course
Southern Surveying and Mapping Software
(
) Professional Surveying Course
Engineering Surveying Encyclopedia Encyclopedia of Instrument Operation
(
)
Professional Practical Training Course Measuring Instrument Training (Distance Meter Level Full Site Laser collimator)
Advantages of our school
Students studying in our school have lifetime tuition fees and can go to our school or other campuses to attend classes at any time to strengthen their professional knowledge that they still don’t understand {must bring your class attendance certificate} There are no campus restrictions and no class restrictions.
Our school has an employment department specifically for students. Every year, the main school holds large-scale job fairs. There are so many companies giving students a wider choice
Professional training includes estimator construction. Surveyor, data clerk, electrician, welder, excavator, etc.
Contact address: Jiefang Road No., Nanming District, Guiyang City
Contact teacher Yin’s phone number: QQ