Nanning cast iron inspection plate/shock absorber test bench/test room iron floor in large quantities in stock

材质：

HT250

型号：

齐全

硬度：

HB200

Technical information of the motor test platform. The working surface is manufactured according to the standard. The grooves machined by the machine tool can also have bolt holes. The surface is manually scraped and ground to ensure plane accuracy. Remove the molding sand from the non-machined surface and apply anti-rust paint.
< In order to ensure the plane accuracy of the motor test platform, % of the test platform manufacturers adopt a manual scraping and grinding process. Although manual scraping and grinding takes a long time, for the motor experimental platform, it is a processing technology that cannot be replaced by any mechanical processing when the accuracy requirements are relatively high. In order to improve the service life of the experimental platform and ensure its working accuracy, it is recommended to control the scraping depth to the above level. This can ensure that the experimental platform has a long service life and calibration cycle. According to the introduction of the scraping depth and the measured data of the scraping depth according to the relevant information, the processing requirements of this process can be met.
< There are holes or grooves on the cast iron motor test bench to fix the workpiece and clean the iron chips generated during processing or place fixing pins. It can also be designed as a flat surface. The material of the test platform is high-strength cast iron workbench. The general hardness is HB. The best hardness is above HB. The accuracy of the test platform is divided into four levels. It is manufactured according to national standards. The cast iron motor test bench is mainly used for power experiments mainly on mechanical motor engines. Specifications are divided into h. Larger than this specification can be spliced
<