- 品牌:
- 天德立
- 型号:
- J3GY-LD-400A
- 电压:
- 380V
Abrasive cutting machines are commonly used equipment for sharpening various props and tools.
The grinding wheel cutting machine is mainly composed of a base grinding wheel motor or other power source bracket, a protective cover and a water feeder. The grinding wheel is set on the top surface of the base. The interior of the base has a space for housing the power source. The source drive is a reducer. The reducer has a drive shaft that passes through the top surface of the base for fixing the grinding wheel. The base has a concave water collection area corresponding to the bottom position of the grinding wheel. The water collection area extends outward and a channel water feeder is located on the grinding wheel. There is a space for holding water liquid in the upper side water feeder, and a water outlet is provided on the side of the water feeder corresponding to the grinding wheel. The overall transmission mechanism is very streamlined and perfect, making the grinding process more convenient and smooth and improving the grinding efficiency of the overall grinder. The grinding wheel is brittle and rotates at a high speed. Safety operating procedures should be strictly followed when using it.
Model of grinding wheel cutting machine
Main technical parameters of grinding wheel cutting machine
Rated voltage motor power. Frequency HZ spindle speed r. Cutting blade specifications. Clamp adjustment range Maximum cutting capacity angle steel round steel ф Channel steel pipeф* Overall dimensions (length) (width) (height)
Grinding wheel cutting machine operating procedures
Before working, you must wear labor protection supplies and check whether the equipment has a qualified grounding wire. It is necessary to check whether the grinding wheel cutting machine is in good condition and whether the grinding wheel discs have cracks or defects. It is forbidden to use defective equipment and unqualified grinding wheel discs. Do not use excessive force or sudden impact when cutting. If there is any abnormality, turn off the power immediately. The material to be cut must be clamped with a vise. One person is not allowed to support the material and the other person is cutting the material. The person must stand on the side of the grinding wheel when cutting. When replacing the grinding wheel discs, wait until the equipment has stopped and check the grinding wheel discs for confirmation. Tools and other items are not allowed to be stored on the rack during operation.
Due to the different shooting angles of specific models in product production batches, the pictures are for reference only. For details, please contact our sales staff for specific verification.
Phone (WeChat)
Landline
Penguin