S78 series machine tool vibration damping horn

Product Features Vibration-absorbing rubber can effectively attenuate the vibration of the machine itself, reduce the transmission of vibration force to the outside, prevent the transmission of vibration force, and ensure the dimensional accuracy and quality of processing. Controlling building structures reduces transmitted vibration forces and noise. Make roughing and finishing machine tools form a production unit to adapt to the development of logistics technology.
There is no need to install anchor bolts to fix the machine tool to the ground. Good vibration damping and considerable vertical deflection make the machine tool stable on the ground. Save installation costs and shorten the installation cycle. The position of the machine tool can be changed at any time according to production, eliminating secondary installation costs and making it possible to install the machine tool upstairs.
The level of the machine tool can be adjusted, the adjustment range is large, convenient and fast
Using nitrile synthetic rubber, resistant to grease and coolant
Applicable scope: metal processing machine tools, forging machine tools, textiles, printing machinery, food Processing machines, rubber machinery, wire and cable machinery, packaging machinery, generators and heavy equipment.
Instructions for use: Place the required pads under the machine tool's foot holes, insert the bolts, and screw them until they are firmly in contact with the load-bearing plate, and then adjust the machine tool level (the bolts rotate clockwise and the machine tool rises). After adjusting the level of the machine tool, tighten the nut to fix the level state.
Due to the milky phenomenon of rubber, when the horn is used for the first time, the machine tool level should be adjusted again after two weeks.
Product number Rubber hardness value Dimensional parameters
Bolts
Adjustable height
Maximum static load of a single piece

/
/
/
/
/
/
/
/