Special dust collector frame for feed machinery

To extend the service life of the special frame for feed machinery, the following points should be noted
. Suitable filter material: According to the temperature and chemical characteristics of the gas, the particle size, weight, shape, whether it is abrasive, and the dust concentration, the filtration speed Factors such as the emission concentration of the dust cleaning method and the working system of the bag dust collector are comprehensively considered.
.Reasonable structure: It should meet the filtration and dust cleaning requirements of the matching bag dust collector, and it should be easy to install, seal and reliable, pursue the corresponding filtration area and good filtration status, be easy to clean, and avoid wear and tear as much as possible. Reasonable coordination with related parts.
.Sewing technology: The sewing size meets the design requirements and the heat shrinkage size is reserved according to the type of filter material and the use temperature. The stitch length is reasonable and the stitches without skipped stitches or broken threads meet the requirements. The combination is reasonable and there are no burrs or breaks that would damage the dust bag.
.Correct usage: Make sure that the dust collector filter bag is operating in the working conditions to which it is adapted. If the working conditions change, it should be immediately switched to bypass or drained to prevent adverse effects on the life of the filter bag.
. Correct dust cleaning method. During use, the dust on the dust-facing area of the filter bag gradually increases and the pressure difference rises. Effective dust cleaning should be used to isolate the dust to keep the pressure difference inside and outside the filter bag within the set range.
.According to different working conditions, the dust removal frame should be treated with different working conditions. For example: in corrosive working conditions, the dust removal frame should be treated with silicone to prevent corrosion to the dust collector frame. Dust removal bags should use anti-corrosion filter materials. .