Year1
- 生产率：
- 3000-7000粒/分
- 主电机功率：
- 250瓦（W）
- 外形尺寸：
- 950×400×1100
Small capsule polishing machine, capsule polishing machine, adjustable capsule polishing machine Small capsule polishing machine price Small capsule polishing machine manufacturer
Product introduction
Pharmaceutical polishing machine is the application of brush The principle of polishing processing is to remove the powder attached to the surface of capsules and tablets to make the surface clean and bright. It is an essential equipment for the post-processing process of capsules and tablets.
The polishing and conveying process of this machine is a closed structure. The parts in contact with the drug are made of corrosion-resistant materials and are easy to disassemble and clean. It complies with the requirements for pharmaceutical equipment in the Implementation Guidelines for Pharmaceutical Production Management Practices.
This machine can meet the requirements of capsule polishing. The tilt angle of the spindle can be adjusted arbitrarily within a certain range to meet the polishing time requirements of different drugs. The machine base is equipped with movable casters to place the machine in different working locations.
Product technical parameters
Productivity: grains/min
Main motor power: watts
Overall dimensions
Machine weight: kg
Machine structure
This machine consists of a base, a discharge port, a frame, a single-phase motor, a polishing brush, a glass cover, a mesh bag, a hopper, and a vacuum cleaner (self-prepared). The polishing brush is directly driven by the motor. After the medicine to be polished according to the rotation speed is put into the hopper, as the brush rotates, it is input to the discharge port along the bag, and the brushed powder will be collected into the vacuum cleaner, frame The working angle can be adjusted with the help of the support rod and locking handle.
Machine use and adjustment
Machine installation requirements
This machine can be used on any flat ground and only needs a single-phase three-pin socket (&~).
After the machine is installed, connect the vacuum cleaner, turn on the power, place the material container under the discharge port, and observe the working condition of the main machine vacuum cleaner to test the speed adjustment performance. If the operation is normal, a small amount of medicine can be added to the hopper for polishing. According to the surface condition of the polished medicine, the inclination angle of the frame can be adjusted respectively until the polished medicine meets the requirements, and formal production can be started. After the production of a batch of medicines is completed, it needs to be idle for two minutes. After the dust in the conveying pipe is removed, polishing of different medicines can be carried out.
, Polishing time adjustment
Adjust the inclination angle of the frame and change the height difference between the outlet and the inlet to change the residence time of the medicine in the polishing machine. The greater the inclination angle, the longer the polishing time. The longer it is, the shorter it is on the contrary. When adjusting, you must first hold the rear section of the rack firmly to prevent the bracket from losing balance and damaging the rack after loosening the locking screws. Adjust the tilt angle of the rack and retighten the locking screws.
, Cleaning
Use a wrench to loosen the set screws at both ends, remove the cover, take out the upper cover, tear off the mesh, loosen the coupling set screws, and carefully take out the shaft Blow clean the compressed air, reinstall and fix it in the opposite direction, and try turning it by hand until there is no sticking or abnormality before starting the machine. Welcome to call to order.
Contact person: Zhou Panpan
Mobile phone
@
Address: Kaiyuan Road, High-tech Zone, Jining City, Shandong Province
No. br/>
WhatsApp
