Research and development of fully automatic rail sawing machine_Internal combustion rail sawing machine_Construction machinery

Automatic rail sawing machine research and development internal combustion rail sawing machine engineering machinery
Ningshuangxing specializes in the production of road spikes, gauge baffles, rail gauge tie rods, rail presses, fishplates, track picks, fishbolts, fasteners, Iron backing plate, rubber backing plate, triple link, fishtail bolt, fork bolt, square road spike, wood threaded spike, spiral spike, pressure gauge, rail guard spike, gauge baffle, track plywood, fishtail Plate, pressure plate, buckle plate, track fastener, iron pad, rubber pad, insulated gauge tie rod, welded anti-climb device, rail clamp, track starting machine, hydraulic bending machine, trigger machine, gauge block bomb Railway accessories such as strips, mining accessories
Automatic rail sawing machine research and development of internal combustion rail sawing machine engineering machinery
Ning has been a professional manufacturer for ten years
Customer consultationbr/> Contact Manager Meng
Addressed in Anshan City, Liaoning Province

True Technology Servicebr/>Creating industry-leading Pinning Shuangxing
Automatic rail saw machine research and development Internal combustion rail saw machine engineering machinery
Detailed parameters
Development of automatic rail saw machine and internal combustion rail saw machine engineering machinery
Maintenance and repair of engineering machinery
The swing arm and the long axis should be kept lubricated, and lubricating oil should be injected into the oil injection nozzle regularly.
After the rail cutting machine has been running for accumulated hours, the main shaft bearing should be disassembled and cleaned, and the grease should be replaced.
The swing arm and the cutting arm are connected by threaded pins, which have been adjusted before leaving the factory. When they become loose after wear, the locking nut can be loosened, the threaded pins are rotated, and the axial clearance of each part is adjusted. Make sure they can rotate with each other without axial movement, and then tighten the nut.
The tension of the belt drive is adjusted by turning the two hexagonal bolts.
Do not throw or drop during use and transportation.
If not used for a long time, it should be placed in a ventilated, dry, and corrosive-free warehouse. The internal combustion engine should release fuel.
The thin disc grinding wheel should be moisture-proof, anti-collision and anti-pressure.
The recommended operating ambient temperature for gasoline engines is between ℃ and ℃.
It is recommended to use unleaded gasoline with an octane number or higher. When filling gasoline, the engine should be stopped and kept away from fire sources. Refueling should be done in an appropriate amount. After refueling, the remaining gasoline on the surface of the machine should be wiped clean.
Frequently check whether the lubricating oil of the gasoline engine is sufficient and whether the air filter is clean.
Do not let the machine be exposed to rain. If it is exposed to rain, dry the gasoline engine and all parts of the machine.
Automatic rail saw machine research and development internal combustion rail saw machine engineering machinery
Ningshuangxing after-sales service commitment
Service tenet is fast, decisive, accurate, thoughtful and thorough.
Service goals: Service quality wins customer satisfaction.
Service Efficiency If the equipment fails during or outside the warranty period, after the supplier receives notification, maintenance personnel can arrive at the site and start repairs within hours.
Service Principle The product warranty period is one to twelve months. During the warranty period, the supplier will repair and replace parts damaged due to quality reasons free of charge. If parts are damaged outside the warranty period, only the cost will be charged for the accessories provided. If the equipment is damaged due to human factors on the part of the buyer, any repairs or accessories provided by the supplier shall be priced at cost.
Ningshuangxing produces and sells the following products
Railway vehicle internal combustion tamping picks, tamping machines, hydraulic rail hole extruders, hydraulic rail drilling machines, manual rail drilling machines, rack-type track starters machine, hydraulic track starter, rail cutting machine, square sleeper, hydraulic rail straightener, rerailer, universal gauge ruler, rail grinder, square ruler, rail transport car, etc.
Track accessories baffles, switches, Turnout accessories, turnout tie rods, track gauges, track gauges, track gauges, track gauges, anchor rods, anchor drill rods, pneumatic drill rods, turnout pads, track splints, track spikes, insulating splints, crossover switches, Backing plate, composite rubber backing plate, track fastener rail clamp, gauge tie rod, guard rail buckle plate, line buckle plate base, insulated gauge rod, buckle plate, twist drill pipe, coal drill pipe, twist drill pipe, connecting sleeve , chain spreader, draft drill, anchor pallet, pallet, nylon baffle seat, manual switch, manual bender, bender, bending machine, rail pressure plate, fish plate, fish tail Bolts etc.
Ningshuangxing sales network in northern China, Shanxi, Inner Mongolia, Liaoning, Jilin, Heilongjiang, Beijing, Tianjin, Shanghai, Jiangsu, Zhejiang, Anhui, Fujian, Jiangxi, Shandong, Henan, Hubei, Chongqing, Sichuan, Guizhou, Yunnan, Shaanxi, Gansu, Ningxia, Xinjiang and other places.
Note that the above content is provided by Liaoning Shuangxing Railway Machinery Co., Ltd. Related product parameters and pictures are for reference only. Specific products may have different origins due to different production batches. Please contact the sales staff for specific details.