Supply CDH-C20 plug-in sliding car stop

Plug-in sliding car stop manufacturer DH plug-in sliding car stop Plug-in sliding car stop price Plug-in sliding car stop function
You are thinking: Why is it so difficult to buy something? Choose I've been choosing and haven't decided which one to buy. I'm afraid of getting scammed when buying online, and the prices in physical stores are so high. what to do?
Product details of DH plug-in sliding car stop
Product introduction of H plug-in sliding car stop
H plug-in sliding car stop is installed at the end of the railway to prevent the vehicle from hitting the car when it slips away blocking safety equipment. The DH car stop is an improved version of the DH type car stop. It has a reasonable structure and large braking force. The support arm and the brake rail adopt a plug-in connection method, which is easy to install, easy to maintain and reset.
H plug-in sliding stopper product technical indicators
The total horizontal resistance of the stopper is not less than.
The maximum collision speed allowed for vehicles to collide with the vehicle barrier is m/h.
The center of the buffer rubber plate is mm high from the basic rail surface.
H plug-in sliding stopper product structure and working principle
The stopper consists of a main frame and two pairs of boosters, with a total length of mm.
, buffer rubber plate.
The impact force of the vehicle is transmitted to the brake rail by the buffer rubber plate and the left and right arms of the support.
, brake rail, spring seat. Frictional resistance is generated with the basic rail to prevent the vehicle from sliding.
, an elastic pressurizing device is composed of a leaf spring, a spring seat, a wedge iron, and a bearing. It is installed in the brake rail of the main frame and the brake rail of the booster. The function of the train stopper is to stabilize the train stopper. A pre-pressure is formed when braking, which increases the frictional resistance during braking, and enables the braking force to continue to act until the vehicle stops dynamically.
The arm plate is made of a whole plate. It consists of a support, front and rear beams, and upper and lower inclined beams that are closely connected to form the main frame. The structure is reasonable, the whole is strong, and it can withstand the impact of a vehicle at a high speed.
The arm plate is inserted directly into the brake rail from the lower shoe-shaped block. It has a simple structure and is easy to install, maintain and reset.
After the main frame is stressed, the two pairs of brake rails in front of the car stopper, the two pairs of brake rails at the back and the two pairs of boosters are sequentially pushed to slide. The friction resistance gradually increases, which can prevent the vehicle and the main frame from being damaged. , and can increase the cumulative resistance of the vehicle stopper. Has greater braking capacity.
H plug-in sliding stopper installation method and requirements
The technical conditions of the line should comply with the public works standards, and the track gauge should be +.
. The car stopper should be installed on the last section of rail at the end of the end line, close to the rail joint and where there is no fish plate. There should be a certain distance between the car stopper and the end of the end line. The greater the distance, the better the braking effect. .
Contact person: Chen He
Phone: (also a WeChat ID)
QQ
Address: North No. Kaiyuan Road, High-tech Zone, Shandong Province