Advantages of fully automatic rail sawing machine_Feature analysis_Shuangxing Manufacturing

Advantages of fully automatic rail sawing machine_Characteristic analysis_Shuangxing Manufacturing
In the vast sea of the Internet, it is our honor that you can see our company's promotional information. The railway equipment produced by our factory is a very cost-effective product with a long-term Years of external wholesale, Shenyang Railway Bureau, Fuxin Mining Department, Baicheng Mining Procurement Designated Manufacturer, strict quality control, mature technology and experience, applicable to high-speed rail, subway and ordinary railway, can be customized according to the style required by the purchasing customer, and processed according to drawings. Spot wholesale, cash on delivery is also available upon request.
Advantages of fully automatic rail sawing machine_Feature analysis_Shuangxing Manufacturing
Liaoning Shuangxing has been specialized in manufacturing for 20 years
Customer consultation
Contact: Manager Meng
Address: Anshan City, Liaoning Province
Office QQ
Fax
Technical Service
Striving to create the industry-leading brand Liaoning Shuangxing
Advantages of fully automatic rail sawing machine_Feature Analysis_Shuangxing Manufacturing
Detailed parameters
Advantages of fully automatic rail sawing machine_Characteristic analysis_Shuangxing Manufacturing
Key points for operating the electric rail sawing machine
Without installing a thin grinding wheel, turn on Turn on the power supply, press the power button, observe whether the grinding wheel spindle rotates and pay attention to whether its rotation direction is consistent with the rotation direction of the grinding wheel marked on the protective cover. If the spindle does not rotate or the direction of rotation is inconsistent with the direction of rotation of the grinding wheel marked on the protective cover, press the shutdown button to cut off the power supply, change the power phase sequence, and repeat the above process until the grinding wheel spindle rotates before installing the thin grinding wheel.
Before installing the wafer grinding wheel, check whether there are cracks in the wafer grinding wheel and whether both sides are straight. The uneven surface may easily cause the incision to deflect and clip. After installing the wafer grinding wheel, tighten the locking nut, but the torque should not be too large to avoid crushing. Thin disc grinding wheel.
. Install the rail cutting machine on the rail and pull out the positioning rod installed on the fixture. At this time, the position indicated by the end face of the positioning rod is the cutting position of the grinding wheel. Move the rail cutting machine to the preset position as needed. Cutting position. Then make the inner surface (convex surface) of the clamp close to the top surface of the rail and the lower part of the rail palate, tighten the fixing bolt, and the rail cutting machine is in working condition.
. Pull the joystick with one hand to keep the rail cutting machine above the rail. At the same time, support the other joystick with the other hand to prevent the thin grinding wheel from hitting the rail.
After installing the rail cutting machine, press the start button to start the motor. After the motor is started, the no-load running time should be no less than seconds. Observe whether the thin grinding wheel is running smoothly, whether it is deflected or jumped, and whether all parts are normal. If any abnormality is found, the machine should be stopped to replace the grinding wheel or troubleshoot.
When cutting, the feeding of the thin grinding wheel mainly depends on the dead weight of the rail cutting machine and the swing of the joystick. Therefore, when holding the joystick with both hands, do not apply downward force and swing the joystick rhythmically as needed.
During the cutting process, the joystick must be kept swinging back and forth and must not stop somewhere. When pinching occurs, slowly lift the lamella grinding wheel, and then continue cutting. If pinching still occurs, stop the machine to check the cause or replace the lamella grinding wheel. When re-cutting, the thin grinding wheel must completely match the original cut, otherwise, the cutting position should be changed.
During the cutting process, if the cut is tilted, the machine should be stopped to check the cause, troubleshoot or replace the thin grinding wheel, change the cutting position, and cut again.
Usually, the top of the rail is cut first, then the waist, and then the bottom until it is cut off.
When the thin grinding wheel is worn to a certain extent (the diameter of the grinding wheel is about less than mm), it may not be possible to cut the rail from one side of the rail. At this time, the grinding wheel needs to be moved to the other side to cut the rail in half until it is cut. When the diameter of the grinding wheel is less than about mm after wear, due to the reduction of the linear speed of the grinding wheel, the wear of the grinding wheel will be accelerated. At this time, even if the rail is cut in half, the rail may not be completely cut. It is recommended to replace the thin grinding wheel to avoid that the rail is not cut, and then replace the grinding wheel and cause a new grinding wheel. It does not match the original incision.
Advantages of fully automatic rail sawing machine_Characteristic analysis_Shuangxing Manufacturing
Liaoning Shuangxing after-sales service commitment
Service tenet: fast, decisive, accurate, thoughtful and thorough.
, Service goal: Service quality wins user satisfaction.
Service efficiency: If the equipment fails during or outside the warranty period, after the supplier receives notification, maintenance personnel can arrive at the site and start repairs within hours.
Service principle: The product warranty period is one to twelve months. During the warranty period, the supplier will repair and replace parts damaged due to quality reasons free of charge. If parts are damaged outside the warranty period, the accessories provided will only Cost fees are charged. Equipment damage caused by human factors on the demand side, and repairs or accessories provided by the supplier will be priced at cost.
Liaoning Shuangxing produces and sells the following products
☆Railway transportation: internal combustion tamping picks, tamping machines, hydraulic rail drilling machines, hydraulic rail drilling machines, manual rail drilling machines, rack type Track starter, hydraulic track starter, rail cutting machine, square sleeper, hydraulic rail straightener, rerailer, universal gauge ruler, rail grinder, square ruler, rail transport car, etc.
☆Track accessories: stoppers Plate, turnout, turnout accessories, turnout tie rod, track gauge, track gauge, track gauge, track gauge, anchor rod, b anchor drill pipe, b pneumatic drill pipe, turnout pad, track splint, road stud, insulation Plywood, crossover line switches, pads, composite rubber pads, track fixings rail clamps, gauge tie rods, guard rail buckle plates, line buckle plate bases, insulated gauge rods, buckle plates, twist drill pipes, coal drill pipes, Twist drill pipe, connecting sleeve, chain spreader, wind drill, anchor pallet, pallet, nylon baffle seat, manual switch, manual bender, bender, bending machine, rail clamp plate, Fish plate, fish bolt, etc.
Liaoning Shuangxing sales network Hebei, Shanxi, Inner Mongolia, Liaoning, Jilin, Heilongjiang, Beijing, Tianjin, Shanghai, Jiangsu, Zhejiang, Anhui, Fujian, Jiangxi, Shandong, Henan, Hubei, Chongqing, Sichuan, Guizhou, Yunnan, Shaanxi, Gansu, Ningxia, Xinjiang and other places.
Note: The above content is provided by Liaoning Shuangxing Railway Machinery Co., Ltd. Related product parameters and pictures are for reference only. Specific products may have different origins due to different production batches. Please contact the sales staff for specific details.