30Kg vacuum induction melting furnace

(1. Main purpose
This equipment is a semi-continuous operation mode and is suitable for mass production of precision casting products under vacuum, such as engine blades, impellers, high-pressure resistant pipe fittings, corrosion-resistant valve cores and other parts.
< br/> 2. Main technical parameters
Power supply: (B)
Intermediate frequency: Hz
Crucible capacity
Maximum temperature: degrees
Ultimate vacuum of the melting chamber: *
Vacuuming time of the melting chamber: no more than minutes
Ultimate vacuum of the ingot chamber:
Vacuuming time of the ingot chamber: no more than minutes

3. Structure introduction
br/> It adopts an all-stainless steel furnace shell and is divided into three chambers, namely the main charging chamber (including infrared and thermocouple temperature measurement), the melting chamber, the ingot casting chamber, etc. Each chamber is isolated by a vacuum valve.
Three sets are used The vacuum system serves three chambers respectively.
The side door of the ingot casting chamber allows access to the lower part of the mold shell, making it easy to operate.
The tilting furnace, ingot mold lifting and lowering, main valve opening and closing, etc. are fully hydraulically driven and operate reliably. , no vibration.
Power supply, fast power input, combined with high pumping speed vacuum system, high production efficiency.