Year1
- 规格：
- 25kg/袋
Polymer anti-crack mortar
Flexible + rigid dual anti-crack
Polymer flexible anti-crack mortar is suitable for plastering the base layer of polystyrene boards and extruded boards in exterior wall external insulation systems.
Polymer anti-cracking mortar is suitable for plastering the base layer of polystyrene boards and extruded boards in exterior wall insulation systems.
Polymer anti-cracking mortar is suitable for inserting mesh frames in exterior wall insulation systems and for plastering smooth concrete bases.
Performance indicators
> Test items
Performance indicators
Inspection results
Tensile bonding strength
Mortar polystyrene board
Normal temperature
, and the polystyrene board is broken
And the polystyrene board is broken
< br/> Water-resistant
, and the polystyrene board is broken
And the polystyrene board is broken
Freeze-thaw resistance
, and the polystyrene board is broken
And the polystyrene board is broken
Mortar mortar
Normal temperature
Water
Temperature resistant
Freeze and thaw resistance
Operable time,
< br/>
Flexibility (fold ratio)
Water absorption,/
Water permeability,
Crack resistance
No cracks below
No cracks below
How to construct?
The proportion is prepared according to the water-cement ratio. Only water is allowed to be added to this material, and no cement, sand, gravel or additives can be added.
. Preparation method: Take a clean bucket, add a certain amount of water, and stir while pouring. Use a low speed (less than one revolution per minute).
Stir the mixer for about 10 minutes, let it stand for 10 minutes, and then Stir twice before use.
. Construction method: Plastering mortar can be applied directly with special tools, and the thickness is about 10 minutes behind the wall
(Grid cloth must be laid depending on the temperature to avoid crusting on the mortar surface.
, The best use time is minutes for each mixing time, and the maximum use time is hours.
, Please note that after each use, the remaining materials that have initially solidified cannot be diluted with water or mixed with new materials.< br/> When the ambient temperature is higher than ℃, construction should be equipped with shading equipment to prevent the material from being exposed directly to the sun
Water loss. When the ambient temperature is lower than ℃, no construction is allowed.
Reference dosage thin wiping Ash/
Packaging and storage
※The packaging specification of this product is/bag.
※This product should be stored indoors in a dry, ventilated, moisture-proof and rain-proof environment. The shelf life is one month.
※
This product is non-toxic, odorless, non-radiative, meets environmental protection requirements, and can be stored and transported as general cargo.
All products of our company have been tested by the national testing laboratory. All products of our company have been tested Qualified, no worries! At the same time, our company has professional and technical personnel to solve all engineering problems, problems, etc. for our users for free
Anti-crack mortar
WhatsApp
