Sales of NGZ-32 Internal Combustion Rail Drilling Machine Hollow Drill Bits Good Sales

' ※Product Introduction
'
' Z internal combustion rail drilling machine (hollow drill bit) is a special tool for rails. This machine has a wide range of applications. It can be used on lines, in construction, and in large and medium-sized line maintenance operations. It is light in weight, small in size, and is a portable machine. The clamping is firm during operation,
'
' 2. Detailed parameters of Z internal combustion rail drilling machine (hollow drill bit)
'
' Gasoline engine: ZH., two-stroke gasoline engine. Drilling diameter: .m
'
' Rated speed: r/
'
' Drilling accuracy: hole position tolerance m
'
' Drilling time: time to drill through once
'
' Overall machine quality:
'
' Overall dimensions: mm.
'
' 3. Z Internal Combustion Rail Drilling Machine (Hollow Drill Bit) Operating Procedures
'
' Operators must be trained and certified to work. Wear protective glasses, gloves and minimum protective equipment when working.
'
' Before operation, check whether the machine is operating normally, whether the drill bit is clamped, and clean the remaining chips in the drill bit. Is the cooling system normal?
'
'. Remember not to touch the exhaust pipe and cylinder of the gasoline engine to avoid burns.
'
' When refueling the machine, you must stop the machine and wait until it cools down. Keep away from fire sources and smoking is strictly prohibited.
'
'. Two-stroke gasoline engines must use a mixture of gasoline and engine oil adjusted in proportion. It is absolutely prohibited to use pure gasoline as fuel
'
'. After the internal combustion engine is started and It must run at low speed without load for ~ minutes before stopping. It is strictly forbidden to run at high speed without load and at high speed and to stop suddenly during high speed operation.
'
'
4. Operation of the cooling device
'
' The cutting fluid used in the drill bit is machine tool emulsified soap.
'
' The upper part of the cutting fluid barrel is equipped with a sealing and pressurizing device, which is pressurized with a pressurizing handle.
'
' Before use, pull the pressure reducing valve to check its reliable function and ensure safe use.
'
'. When using, open and close the stop valve, and use the stop valve to adjust the liquid supply.
'
' The mixing ratio of gasoline and engine oil is based on the volume ratio of:. Use a special pot to mix. Shake evenly during the mixing process. It is strictly forbidden to mix at will without following the requirements. It is best to do it outdoors. Carry out in a ventilated place.
'
' Clean the fuel tank frequently and clean the filter in the fuel tank cap and surrounding dust before refueling to prevent dust from clogging the fuel pipe.
'