Walking corn stalk picking and bundling machine

型号：

SL5080

功率：

18马力

产量：

4亩

Supporting power:
-horsepower
Output:
mu
Product specifications:

Type:
Baler
Applicable objects ：
Pigs, cattle, sheep, horses, donkeys, mules, rabbits
Dimensions:
**
Usage:
Livestock product processing machinery
Brand:
Shenglong
Model:


1. Main features of the product
, integrating picking and bundling
, small size , light weight, compact structure, easy to operate
High work efficiency, operating efficiency - mu per hour, can be used behind the combine harvester.
2. The working principle and key points of operation of the baler:
The working process is that the power output shaft of the tractor inputs the power of the tractor to the input shaft of the baler through the universal transmission shaft, and through the sprocket and chain The rolling roller mechanism and grass picking mechanism are respectively driven and the hydraulic output interface of the tractor is used to control the expansion and contraction of the cylinder piston to realize the bale placing operation. The tractor pulls the picking and bundling machine to ride on the straw that has formed into ridges after receiving the goods. As the tractor moves forward, the power output shaft is hooked up, and the picking mechanism that has been pre-adjusted to the appropriate height begins to rotate, picking up the straw and feeding it into the roll. Pressing chamber, with the continuous rotation of the bundling machine drum, the straw entering the rolling and pressing chamber gradually changes from small to large to form a tight round bundle. When the bale reaches the predetermined density, the bale expansion switch is automatically turned on and the alarm horn sounds. The driver stops the tractor and pushes the rope feeding clutch. The rope feeding starts. When it is found that the rope feeding is accelerating, the clutch is released and the tractor power output shaft continues to rotate. The rope tying begins. After a predetermined number of turns, the rope is automatically cut and the rope tying ends. The driver pulls the hydraulic operating lever to reverse the direction of the hydraulic valve, the oil cylinder works, the rear frame opens, and the straw bale is thrown out. After the bale is released, the hydraulic valve is reset, the rear frame is closed, one cycle ends, the tractor continues to move forward, and picking begins the next cycle.
3. Key points of operating techniques The following key points should be grasped during the operation:
Drivers should be proficient in driving operating techniques. When working, the truck should be driven in the center to prevent the bale from appearing bulky.
.The strapping uses an external core-pulling structure with few knots and high strength to prevent the rope from breaking or getting stuck.
3. When feeding the rope, the throttle should be steady and the throttle should be kept at a medium speed to ensure the quality of the rope feeding.
. When the rope feeding stops, move the hydraulic valve immediately without stopping to prevent the bales from being scattered by the pressure roller. The bale should not be slowed down when unloading so that the bale can be released by rotational inertia.