Second generation pneumatic diaphragm pump

口径25-100：

扬程50米

There are no complicated control systems, no cables, fuses, etc.
>The flow rate is adjustable, and a throttle valve can be installed at the material outlet to adjust the flow rate.
Can pass liquid containing particles: because it works in a positive displacement manner and the inlet is a ball valve, it is not easily blocked.
The shear force on the material is extremely low: it is sucked in and spit out during operation, so the agitation of the material is minimal, suitable for the transportation of unstable substances
No sparks are generated: pneumatic diaphragm pumps are not used Electricity is used as power, and static sparks are prevented after grounding.
Has the function of self-priming.
Can be run dry without danger.
Can work diving.
The fluids that can be transported are extremely wide, from low viscosity to high viscosity, from corrosive to viscous.
The pump will not overheat: compressed air acts as power, and when exhausting, it is a process of expansion and heat absorption. When the pneumatic pump is working, the temperature is reduced and no harmful gas is discharged.
Small size, light weight, easy to move.
No lubrication is required, so maintenance is easy and the working environment will not be polluted by dripping.
The pump can always maintain high efficiency and will not be reduced due to wear.
One hundred percent energy utilization, when the outlet is closed, the pump automatically stops, and the equipment moves, wears, overloads, and heats
There is no moving seal, easy maintenance and avoids leakage. No dead spots when working.