QDX submersible electric pump

口径25-64：

扬程10-32米

The submersible electric pump consists of three parts: the water pump seal and the electric motor. The electric motor is located on the upper part of the electric pump. It is a single-phase or three-phase asynchronous motor. The water pump is located on the lower part of the electric pump. It is a centrifugal impeller and volute structure. A double-end mechanical seal is used between the water pump and the electric motor. Each fixed stop uses a shaped oil-resistant rubber sealing ring for static sealing. <
This series of electric pumps are small in size and light in weight, and are especially used for underground water pumping in rural areas, farmland drainage, garden irrigation, and household water use.
The operating medium is non-corrosive clean water, the sand content in the medium does not exceed the volume and the particle size does not exceed.
The medium temperature does not exceed ℃, and the medium value is between.
The electric pump should be used within the operating range near the rated lift.
The electric pump should be completely immersed in water. The diving depth should not exceed the maximum depth. The electric pump should be above the bottom of the water, but it should not fall into the mud.
The power frequency is , the single-phase voltage is , and the voltage fluctuation range is times the rated value.