Selling Skyly pneumatic diaphragm pump LS40AA-AA-NE-PP-NE

LS40AA-AA-NE-PP-NE-00：

斯凯力气动隔膜泵

LS40AA-AA-NE-PP-NE-00：

斯凯力气动隔膜泵

LS40AA-AA-NE-PP-NE-00：

斯凯力气动隔膜泵

Skyli pneumatic diaphragm pump
Working principle]
The diaphragm pump is driven by compressed air. The directional air distribution valve and the guide valve, called the air chamber, are set in the center of the pump. The medium flows through two meeting points. The flow tube and the outer diaphragm chamber of the pump become the medium chamber through which the medium chamber passes. Check valves are set in each outer diaphragm chamber and are connected by the suction and outlet joints. The pump is self-priming
During operation, the air distribution valve alternates When each diaphragm is pressurized, at each pulse, the air valve will automatically switch positions, allowing the air to switch to another diaphragm chamber, causing the diaphragm chambers on both sides to form alternate suction and pressure delivery strokes, and the diaphragms move in parallel paths. , the air valve does not require lubricating oil, which requires clean and dry air to improve the performance of the pump
Caliber/
Shell aluminum alloy stainless steel plastic
Diaphragm Teflon neoprene
Maximum flow and maximum working pressureBr
Gas-driven explosion-proof
Advantages of Skyli pneumatic diaphragm pump
Patented design of unbalanced air valve, unbalanced piston that will not stop, and absolutely no dead center. Energy consumption is minimal and compressed air leakage is extremely low.
The special rapid exhaust structure fully ensures that the air valve does not freeze and improves air utilization.
The number of parts and wearing parts in a single mercury unit is small.
Patented rib design and use of diaphragm have the longest service life and highest temperature resistance in the industry.
Passed certification, European Community certification.
There is no electric spark, it can run dry, and it can start working with self-priming. It does not require complicated control, is simple to operate, and the self-priming height can reach meters
Different materials can be conveyed by selecting the material of the mercury shell and diaphragm. Characteristics of strong acid, strong alkali and strong organic solvent liquid medium.
No dynamic seal, no contamination of materials, low shear force, not easy to damage the material structure.
It is submersible, movable and easy to carry, and can be used as a mobile mercury.
No rotating parts or bearings, no mechanical shaft seals, no connectors, low maintenance costs.
The conveying speed can be changed by changing the air volume.
The conveying height can be changed by changing the pressure.
It can transport high-thickness and high-viscosity liquid media.
The outlet can be opened and closed at any time without fear of blockage.