Various types of water treatment chemicals

What are the functions of various water treatment chemicals? Let’s briefly explain them. Water treatment chemicals have long been accepted by everyone. It has brought many convenient and economical contributions to enterprises in all walks of life. In terms of type, water treatment chemicals are generally divided into major categories such as corrosion inhibitors, scale inhibitors, flocculants, bactericides, algaecides, cleaning agents, etc. The role of flocculant: The main application environment of flocculant is in places with complex water quality, such as turbid water systems in industry. It can effectively cause suspended solids in the water to adsorb each other, causing them to attract each other and form large particles. substances, thereby reducing the turbidity of water, and the flocculant and B can basically achieve the effect of removing impurities in water.
The role of corrosion and scale inhibitors Corrosion and scale inhibitors are relatively widely used. They are used in equipment that is in contact with water. Of course, except for drinking water equipment, its functions and its With the same name, it is used to prevent equipment from being slowly corroded by water. Generally speaking, it has the function of corrosion and scale inhibition, and it also has the function of a dispersant. We add this type of agent when dealing with scaling equipment. It will slowly dissolve the calcium substances attached to the equipment and make them fall off. During this process, the calcium content of the water will increase. This is a normal phenomenon. Then use the replacement method to replace it so that there is less scaling inside the equipment. Use to achieve what we need.
Functions of cleaning agents There are many types of cleaning agents. We generally use these agents in the cleaning process of system equipment. They are often used in cleaning pre-films. They can remove grease, sludge, and impurities attached to the pipe wall in the system. And the speed is fast. Generally, cleaning agents are injected into the system, and the sewage can be discharged within a few hours of operation. If it is an industrial system, the discharged water will be brown, which means that the substances in the pipes are basically discharged with the sewage system, giving you a clean Pipeline, and then the pre-filming process, we will not discuss it in depth.
The role of bactericidal algaecide Bactericidal algaecide is to kill microorganisms, bacteria and algae. There are many styles and general categories of sterilization and algaecide. They are usually divided into oxidizing type and non-oxidizing type. We target different water quality The purpose of selecting suitable chemicals according to the conditions is to prevent the growth of bacteria and algae in the system and improve the performance of the equipment
Generally speaking, the functions of the above four types of water treatment chemicals are very simple, and most of them occur in the environment in contact with the equipment. While solving the water quality problem, it also protects the equipment and virtually maintains the equipment, killing two birds with one stone. The most important thing is that the cost of water treatment chemicals is much cheaper than equipment overhaul. The use of water treatment chemicals reduces the equipment overhaul cycle. was greatly delayed, which reflects its cost-saving role for the enterprise. In this year, we hope that more types of water treatment chemicals will be developed to benefit the majority of enterprises.