Year1
Temperature sensor The temperature sensing element is: when the temperature of the measured point exceeds the operating temperature, the sensor output normally open contact is closed. The over-temperature indicator light lights up, and the host executes the relay release to realize over-temperature protection and sends out a verbal alarm signal at the same time. The temperature protection can be set to different values by pressing the buttons. Achieve over-temperature protection.
Installation and debugging
The outer diameter of the cable used is ~. Communication cables can also be used, not less than mm.
Associated equipment temperature sensor
┈┈┈┈┈┈┈┈┈
Temperature control input terminal┈┈┈┈┈┈┈┈┈ Normally open contact
Grounding┈┈┈┈ ┈┈┈┈┈
Fix the temperature sensor away from the main drum. When the temperature at the probe reaches the set value, the sensor will act and output at the same time, and the associated equipment will immediately output a control or alarm signal.
Temperature sensors are mainly used for on-site temperature detection in high-temperature tunnels, high-temperature mining faces, tunnel heads and belt conveyors in coal mines. It can be installed in the goaf area and working face of the electromechanical tunnel of the belt conveyor tunnel in the coal mine.
WhatsApp
