Changsheng mold spindle/1.2KW diameter 62MM mold spindle motor

Changsheng spindle motor

Engraving machine high-speed spindle motor/woodworking engraving machine environmentally friendly spindle/kilowatt four-bearing water-cooled spindle price engraving machine series electric spindle is a new technology that integrates the machine tool spindle and spindle motor. It is the main functional component of CNC engraving machine tool. It adopts new mechatronic technology, new processes, and new materials, and has variable frequency stepless speed regulation, low noise, smooth operation, reliability, and good load characteristics. For high-speed drilling, milling and engraving machines. Thank you for purchasing our products. In order to better understand and use the electric spindle of the engraving machine series, and to correctly install and maintain this product, please read the instructions carefully before installing and using it. After mastering the performance of the electric spindle, install and debug it.

Installation and use of Changsheng spindle motor

The working environment temperature of Changsheng electric spindle is usually ℃ ~ ℃.
Before installation, first turn the electric spindle head by hand. It should feel flexible and without any blockage.
Use a megger to check that the stator insulation resistance is not lower than.
. Install the electric spindle that meets the requirements into the machine base. Install it strictly according to the electric spindle installation position diagram. Tighten the screws. The spindle should not be loose when installed into the machine base.
After the Changsheng spindle motor is stored or out of use for several months, it must be replaced with new grease before use, otherwise the life of the electric spindle will be affected.
Correctly connect the spindle motor inlet and outlet pipe joints, and check whether the joints are leaking and smooth. After the water-cooled electric spindle is started and stopped, the coolant must be circulated for cooling. What is the amount of coolant water in liters/kilowatt? Calculated in minutes, the minimum coolant flow rate is not less than liters/minute. The coolant requires a separate water tank and the addition of anti-rust agent. The coolant requires regular replacement every month. The coolant is strictly prohibited to be mixed with cutting fluid to prevent cutting and dirt in the cutting fluid from entering. The cooling water channel of the water-cooled electric spindle blocks the cooling water channel of the water-cooled electric spindle, causing the electric spindle to heat up and burn out. The water temperature is controlled at ℃, and precision processing machine tools require a constant temperature of ℃.
In order to extend the service life of the bearings of the electric spindle, it is required that an air seal must be used when the electric spindle is running. The air seal forms a high-pressure cavity at the front end of the electric spindle bearing to prevent cutting fluid and cutting dust from entering the bearing and causing damage to the bearing. The pressure of the air seal is one atmosphere. The air source is clean air that has passed through the oil and water separation device. It is strictly forbidden to immerse the spindle head in the coolant for processing when the electric spindle is running.
, Changsheng spindle motor must be used with a frequency converter. The frequency converter should be selected to match the voltage, power, frequency and other ranges of the electric spindle.