Reverse osmosis scale inhibitor Li Zhao fire prevention

Permeable membrane scale inhibitor
◇
Product features
Can be used to produce drinking water
Effectively control calcium sulfate and strontium sulfate scaling, up to + no scaling
Suitable for All major reverse osmosis membranes
Disperse blocking particles to keep the surface of the reverse osmosis membrane clean
The water inlet range is still within the effective range
Can be added directly or diluted for use, compatible with organic flocculants
br/> Can be used to control scaling and precipitation in membrane separation systems and reduce particle clogging
◇
Product Features
Clear amber liquid densitybr/> Freezing point ℃ Minimum storage temperature ℃ Viscosity ℃)
◇
Instructions for use

Reverse osmosis scale inhibitor is a high-efficiency liquid scale inhibitor and dispersant, used to control sulfate and iron oxide precipitation in membrane separation systems. scaling. The use of this antiscalant can extend the system cleaning cycle, extend the membrane life and reduce costs.
◇
Problem Description
The inorganic precipitation produced by the high salt content of the incoming water and iron compounds is the main cause of scaling pollution in the membrane separation system. This phenomenon must be controlled to prevent reverse reaction. Deposition occurs on the surface of the permeable membrane and avoids damage to the surface of the reverse osmosis membrane caused by the increased pressure difference. The organic matter content in the incoming water increases, and it is also easy to form fouling of the membrane.
◇
Strong protection to avoid deposition

Reverse osmosis scale inhibitor can be applied to different water sources. This product uses dispersible polymers to prevent hardness and iron oxide deposition and remove organic matter.
◇
Dosing point
In order to achieve maximum effectiveness, it is best to add it before the security filter. The company's technical service personnel will determine the dosing point and dosing amount based on your specific system conditions. In some systems, specific dosing points and injection equipment are necessary.
◇
Dosing amount
The required dosing amount needs to be determined according to the operating conditions of the individual device. An appropriate amount should be calculated based on the incoming water salinity, temperature, recovery rate, type of reverse osmosis membrane and other conditions. The dosage is generally .
◇
Dilution
Reverse osmosis antiscalant can be added directly or diluted for use. Produced water or desalted water should be used for dilution, and the dilution ratio should not exceed the normal temperature.
◇
Packaging
The product packaging form is/plastic barrel.