Ningxia cooling water tower installation ladder platform company reinforcement manufacturer anti-corrosion unit demolition

Ningxia Liangshui Tower Installation Ladder Platform Company Reinforcement Manufacturer Anti-corrosion Unit Demolition
Chimney Installation Rotary Ladder Construction Company
Shaped Steel Folding Ladder Manufacturer Spiral Platform Construction Unit
Ningxia Yinchuan Engineering Chimney Installation Platform Rotary Ladder Engineering Construction Company, Ningxia Shizuishan
Construction unit for new chimney installation platform-shaped steel folding ladder, Ningxia Yinnan chimney installation platform spiral staircase construction manufacturer, Ningxia Guyuan chimney installation dedicated ladder platform engineering construction measures and construction plan for online monitoring of flue gas, Z-shaped ladder, tic-shaped ladder, herringbone installation ladder, high-altitude steel structure painting and anti-corrosion project, complete construction qualification certificate.
[Introduction]
, Construction unit Heilongjiang Iron and Steel Group Thermal Power Co., Ltd.
, Construction unit Jiangsu Jinfeng High-altitude Engineering Co., Ltd. website
, Project name: Chimney installation zigzag ladder project Construction
, Construction location is within the courtyard of Heilongjiang Iron and Steel Group Thermal Power Co., Ltd.
, Project manager Liu Jie’s new technology consultation email@
[Technical support]
Official website of Jinfeng high-altitude engineering qualifications
Safety Production License Level 1
Professional contracting for high-altitude work projects
Professional contracting for high-rise structure projects
Professional contracting for mechanical and electrical equipment installation projects
Professional contracting for anti-corrosion and insulation projects
Building waterproofing projects Professional Contracting
Each construction employee has a high-altitude working certificate, an electrician certificate, an oxygen welder certificate, and an accidental injury insurance policy. The relevant certificate number is consistent with the ID number.
[Summary] Construction and operation techniques for installing chimney steel ladders
, Chimney steel ladder embedded iron parts
Determine the position of the ladder’s embedded iron parts according to the luminous wall drawings, and then spring and release the wires. After the wiring is completed, conduct a review
After checking that the positioning is correct, embed Heineken's chemical anchors (imported) to ensure that the surface of the embedded parts of the chimney is horizontal or vertical, and it is prohibited to be crooked, slanted, tilted, etc.
View Whether the embedded parts of the installation chimney ladder are strong and the position is accurate. The error in embedded parts should not be too large.
, Chimney ladder steel frame manufacturing
According to the drawing specifications, connect the prefabricated thick T-shaped stainless steel plate connecting parts with the embedded parts firmly. The end connecting parts of the rigid frame are thick full-length steel plates, and stainless steel bolts are used at both ends. connection. Strictly control the position error of the connecting parts, and determine the horizontal and vertical positions of the connecting parts on the facade
According to the dimensions of the drawing, cut the steel after correct calculation, and weld and assemble the main structure of the rigid frame after preparation is in place (the two mullions at the nodes are Thick steel plate, the two horizontal frames at the nodes are square tubes, the main outer frame and the vertical frame are both square tubes, and the small beams in the main frame are square tubes. Each steel plate needs to be inspected, adjusted, and corrected before being fixed, and it must be guaranteed The welding must be strong. The welds should be painted with anti-rust paint and zinc protective paint. See the attached drawings for the layout and cross-section of the steel skeleton.
Install the chimney ladder
Install the chimney steel ladder first Finally, place a hard rubber liner along the lower end of the installed chimney steel ladder
Install the pre-cut chimney steel ladder decorative plate into the rigid frame. The surface color of the ladder must meet the design requirements, horizontally, vertically, and flat Clean. (During construction, attention should be paid to facilitating heat dissipation and ventilation in the luminous stone wall, and some ventilation holes must be opened in the composite chimney steel ladder on the top).
, Chimney ladder anti-corrosion repair
Fix the ladder and along the chimney steel ladder Apply a layer of glass glue all around. (To facilitate repair, assembly and disassembly, only glass glue is applied.) The glue injection should be even, dense, and full. At the same time, pay attention to the glue application method to avoid waste
After the glue seam is repaired and glue is injected, the glue should be Use a spatula to apply firm pressure along the direction of glue injection, scrape off the remaining glue, and scrape the glue joint into a drawn shape to make the glue joint lubricated and smooth
Sanitary maintenance
After installing the chimney steel ladder , use special sanitizer to clean the appearance of the chimney steel ladder before delivering it for use.
Jiangsu Jinfeng High-altitude Engineering Co., Ltd.
Address No. Xindu Road, Yancheng Development Zone, Jiangsu
Postal code
Telephone
Fax
Project Manager Liu Jiexin
Mobile
Website
Email@