The XNX type cyclone dust collector is a horn-curved body vertebral sloping bottom type dust collector.

The type cyclone dust collector is a horn-shaped vertebral sloping bottom type dust collector. The type cyclone dust collector is a ox-horn curved vertebral sloping bottom type dust collector. The dust concentration at the entrance should be less than grams/second, the entrance speed should not be less than m/s, and the dust particles should not be Larger than millimeters, the type cyclone dust collector is suitable for general industrial ventilation and dust removal systems, and the recovery of heavy materials in industrial exhaust, such as metallurgy, electric power, mechanical processing, petrochemicals, building materials and other departments. After adding appropriate internal scale, it can be used for heavy wear and tear. Or corrosive occasions, but sticky dust cannot be used.
Type cyclone dust collector is a type of dust removal device. The desettling mechanism is to make the dust-containing air flow rotate, use centrifugal force to separate the dust particles from the air flow and capture them on the wall, and then use gravity to make the dust particles fall into the ash hopper. Cyclone dust collectors began to be used in 2007 and have developed into many types. Type cyclone dust collectors can be divided into two types: tangential entry type and axial entry type according to their flow entry mode. Under the same pressure loss, the latter can handle approximately twice as much gas as the former, and the gas flow is evenly distributed. Ordinary cyclone dust collectors are composed of a simplified body, a cone, and inlet and exhaust pipes.
The cyclone dust collector has a simple structure, is easy to manufacture, install, maintain and manage, and has low equipment investment and operating costs. It has been widely used to separate solid and liquid particles from air flows, or to separate solid particles in industries. Under normal operating conditions, the centrifugal force acting on particles is ~ times that of gravity, so the efficiency of the cyclone dust collector is significantly higher than that of the gravity settling chamber. Most of them are used to remove the above particles. The parallel multi-tube cyclone dust collector device also has ~ high dust removal efficiency for the particles. The cyclone dust collector is constructed of special metal or ceramic materials that are resistant to high temperatures, abrasion and wear, and can operate under conditions of temperatures up to ℃ and pressures up to 100°C. Considering the technical and economic aspects, the pressure loss control range of cyclone dust collector is generally ~.
For more details, please log in