Supply of energy-saving equipment livestock and poultry manure dry and wet separators

规格：

2*1*1.4

型号：

LH-200

材质：

不锈钢

Introduction to Poultry Manure Processor
The development of modern livestock and poultry husbandry and the rise of factory-based intensive livestock husbandry have enriched people’s material needs, but also brought about the flooding of livestock and poultry sewage, causing serious damage to water sources and air. , environmental pollution. The livestock and poultry manure processor is an environmentally friendly equipment for dehydrating livestock and poultry manure in livestock farms. It can separate the raw manure and sewage of livestock and poultry manure into liquid organic fertilizer and solid organic fertilizer. Liquid organic fertilizers can be used for crop utilization and absorption, while solid organic fertilizers can be transported to fertilizer-deficient areas for use and can also improve soil structure. At the same time, they can be made into organic compound fertilizers through fermentation. Use the matching submersible pump to send the raw manure water to the livestock and poultry manure treatment machine. Through the stainless steel spiral shaft placed in the screen, the solid matter is extruded and separated (dry manure liquid flows out from the liquid outlet through the screen.
Working principle of poultry manure processor
Use a submersible pump The raw manure water is lifted and sent to the livestock and poultry manure treatment machine. The squeezing auger gradually pushes the livestock and poultry manure to the front of the machine. At the same time, the pressure on the front edge is continuously increased, forcing the moisture in the material to be squeezed out under the action of the side pressure belt filter. Out of the mesh sieve and out of the drainage pipe. The work of the livestock and poultry manure processor is continuous. The material is continuously lifted into the body. The pressure on the front edge continues to increase. When it reaches a certain level, the discharge port is pushed open. , squeeze out the extrusion port to achieve the purpose of extrusion and discharging. If too much fecal water is pumped in, it will be discharged into the original septic tank through the overflow pipe and also play a role of stirring. The feces separated by screw extrusion and filtration will The wastewater can be sent directly to the sedimentation tank, etc. In order to control the discharging speed and moisture content, the counterweight block under the main machine can be adjusted to achieve a satisfactory and appropriate moisture content.