U-shaped parking lock

It is a swing-type remote control parking lock that lifts up and down. The raised state is marked with a big word. This kind of parking lock is relatively large, eye-catching, and has a good appearance. It is powered by a maintenance-free battery and has general waterproof performance, high waterproofness, and general flushability. There will be no problem in parking lots, etc., but it is not ideal for open-air use.
Installation location The installation method and the installation location of the parking space lock are generally installed at/at the middle entrance of the parking space. The installation conditions require that it be on a flat cement ground. If the parking space in the community is made of tiles or colored tiles, the thickness of the tiles is required to be more than centimeters. If the requirements are not met, the ground can be prefabricated and installed with cement in advance. The prefabricated area should be determined according to the dimensions of the parking space lock. The installation tool power supply includes tens of meters of wire, an electric drill (drill bit or special), hammer, nut socket, tape measure, expansion screw (* or *), etc. Installation method: Use a tape measure to measure the position and then position it. Connect the power supply. First, use an electric drill to align the screw hole and lightly make a mark. Then take the lock and drill the hole according to the mark. The electric drill should be held correctly, and the depth should be the length of the screw. almost. , Re-align the lock, align the screws, insert them and drive them in with a hammer, and finally use a nut set to tighten the specifications
**
**
Material iron, spray paint
Contact phone number Xiao Zhou

When contacting me, please say you saw it on the manufacturer’s trade website